LogicPD,
Here are the kits and part numbers of my setup, I would like to know of any incompatibilities:
DISPLAY KIT:
LCD-12.1-SVGA-10, contains Sharp LQ121S1DG41 panel
P/N 80000175 Rev I
S/N 4104M00002
ZOOM COLDFIRE M5329EVB DEV. KIT:
P/N 1005318 Rev A
S/N 2806M02178
FIRE ENGINE, contains PCF5329CVM240:
P/N 1005316 Rev A
S/N 2806M02344
With LogicLoader 2.1.1-MCF5329_10 0001 freshly re-loaded to 0x00040000, the video-open 2 16 and draw-test commands do nothing on the display itself. Display is blank (white) with backlight on. And yes, the fire engine card is securely seated, with both 80-way connectors underneath securely snapped into place, and the 60-way ribbon cable is installed properly per Display Kit QuickStart Guide instructions.
Any help would be appreciated, thx!
buckeyeman1
|