Marc,
The data sheet for the specific display can be found on Sharp's website.

http://www.sharpsma.com/s...products/display.htm

The display you are looking for is:

LQ035Q7DB02

hello Marc,

I too have same LCD and want to program it. Can you provide any information if you have.

regards
motra

This is what I'm using in APEX. I'm not sure that it works as I know I had some of the fields mis-specified at one point. You can download apex and try it without reflashing.

http://wiki.buici.com

#if defined (CONFIG_LCD_3_5_QVGA_20)
/* Sharp PN LQ035Q7DB02 */
# define PANEL_NAME "LCD 3.5\" QVGA"
# define PEL_CLOCK_EST (6800*1000) /* MHz/4.5/?/6.8 */
# define PEL_CLOCK_DIV CLOCK_TO_DIV(PEL_CLOCK_EST, HCLK)
# define PEL_CLOCK (HCLK/PEL_CLOCK_DIV)
# define PEL_WIDTH (240)
# define PEL_HEIGHT (320)
# define BIT_DEPTH (16)
# define BITS_PER_PEL_2 BPP16
# define HSYNC_WIDTH (61)
# define VSYNC_WIDTH NS_TO_CLOCK (60, PEL_CLOCK)
# define HORZ_BP (16)
# define HORZ_FP (21)
# define VERT_BP (8) /* 8 */
# define VERT_FP (5)
# define INVERT_PIXEL_CLOCK
#endif