Search

Technical Discussion Group Forum

This forum is provided for user discussion. While Beacon EmbeddedWorks support staff and engineers participate, Beacon EmbeddedWorks does not guarantee the accuracy of all information within in the Technical Discussion Group (TDG).

The "Articles" forums provide brief Articles written by Beacon EmbeddedWorks engineers that address the most frequently asked technical questions.

To receive email notifications when updates are posted for a Beacon EmbeddedWorks product download, please subscribe to the TDG Forum of interest.

TDG Forum

PrevPrev Go to previous topic
NextNext Go to next topic
Last Post 28 Nov 2007 04:20 AM by  mdmect
Help on BDIPro configuration for LPD7a404
 0 Replies
Sort:
You are not authorized to post a reply.
Author Messages
mdmect
New Member
New Member
Posts:


--
28 Nov 2007 04:20 AM
    Hi everybody,
    I just started to use an LPD7a404 -10 board and I have troubles in connecting my target with the BDI2000 that is equipped only with BDIpro software (v1.12 -ARM for Windows). I set the jumper for JTAG operation as indicated PN_70000248_REv_b.pdf doc and I tried to configure my BDIPro project following the config file that i found in the LPD7a404 BSP package (bsp/misc/bdi2000/lpd7a404.cfg).
    When I try to dump the flash content I get the following message error:
    Processing target init list failed
    BDM: Targed reset always asserted
    On my target GPIO1 and status LED 1 are blinking
    I would appreciate any help on how to configure my BDIPro.
    Thanks.
    In the following I list my settings:
    Setup-> Target Init list->Main
    WGPR 11 0xb0013ff0 ; Friendly stack frame for GDB
    WM32 0xb0013ff0 0x28
    WM32 0x80002000 0x200041c0 ; Controller settings for Flash: Bank 0, 32bit
    WM32 0x8000201c 0x1000b2c2 ; 16 bit access to CPLD
    WM32 0x80002040 3 ; Enable PCMCIA slots, bug work-around for CPLD
    WM8 0x71000000 0x01 ; Flash programing enable, VPEN
    WM32 0xb0000000 0 ; Cancel BOLO soft reset
    Setup->Target Memory
    Memory Type: Intel 28F640J3 (4Mx16)
    Databus 32 bit
    CPU Type ARM920T
    JTAG clock 8MHz
    Base Address 0x0000000
    Number of Banks 1
    Workspace 0xB0010000
    Endianess: Little
    Use Target alogirthm [checked]
    You are not authorized to post a reply.