Search

Technical Discussion Group Forum

This forum is provided for user discussion. While Beacon EmbeddedWorks support staff and engineers participate, Beacon EmbeddedWorks does not guarantee the accuracy of all information within in the Technical Discussion Group (TDG).

The "Articles" forums provide brief Articles written by Beacon EmbeddedWorks engineers that address the most frequently asked technical questions.

To receive email notifications when updates are posted for a Beacon EmbeddedWorks product download, please subscribe to the TDG Forum of interest.

TDG Forum

PrevPrev Go to previous topic
NextNext Go to next topic
Last Post 10 Nov 2003 01:24 PM by  Anonymous
Toggling Slow Peripherals Chip Select 6 lines
 0 Replies
Sort:
You are not authorized to post a reply.
Author Messages
Anonymous
Posts:


--
10 Nov 2003 01:24 PM
    The LH7A400-10 IO Controller Spec provides instructions for using the Slow Peripherals Chip Select 6 (CS6) area: CompactFlash (CF), ISA-like BUS, Reserved On and Off board memory blocks, and open memory blocks.

    As the IO Controller Spec states, the address range of this area is 0x6000 0000 - 0x63FF FFFF. The CPLD decodes processor address lines uP_MA21-uP_MA25 into SLOW_nCS, CF_nCE, and nAEN.

    The decoding process takes:
    ISA address range --> nAEN line will toggle
    Compact Flach address range --> CF_nCE will toggle
    Chip Select 6 address other than valid CPLD registers --> slow_CS line will toggle.

    Reference CPLD IO controller spec document for valid and unused CPLD register addresses ranges.

    Regards,
    Andrew Wawra
    Logic Product Development
    You are not authorized to post a reply.