Go to previous topic
Go to next topic
Last Post 08 Sep 2003 12:50 PM by
elf-coastal@buici.com
Problem bringing up Bootloader: Alpha characters fill screen
1 Replies
Author
Messages
Anonymous
Posts:
26 Aug 2003 01:59 PM
The J6 JTAG jumpers need to be configured correctly for LH7A400-10 SDK normal operation.
The position for normal operation is detailed in the Quickstart guide (figure 3.3).
J6.1.3.5 and J6.2.4.6 should both be +
If the JTAG Jumpers are not configured correctly the user will see alpha characters fill up their terminal screen.
Andrew Wawra
Tech Support
Logic Product Development.
elf-coastal@buici.com
New Member
Posts:
08 Sep 2003 12:50 PM
FWIW, leaving the J6 jumpers in the '-' positions does appear to work with the 7a400 as long as the console baud rate is set to 19200.
Forums
NXP SOMs and Development Kits
LH7A400 Card Engine and Development Kit