Go to previous topic
Go to next topic
Last Post 13 Jul 2005 03:54 PM by
mikea@logicpd.com
Flash setup
1 Replies
Author
Messages
snair
New Member
Posts:
08 Jul 2005 11:22 AM
Hi All,
I was wondering where the RP# pin (Reset/Power-Down) on the Intel strata flash goes to the micro processor.
Thanks.
Sajiv
mikea@logicpd.com
New Member
Posts:
13 Jul 2005 03:54 PM
Sajiv,
The RP# pin of the Flash is connected to the MSTR_nRST signal on the card engine. This is the master reset, which goes to the S1 button on the Zoom SDK board.
Thanks,
-Mike A.
Forums
NXP SOMs and Development Kits
LH7A400 Card Engine and Development Kit