Go to previous topic
Go to next topic
Last Post 18 Feb 2005 12:15 PM by  snair
SDK-LH7A400 BSP from Sharp
 2 Replies
Author Messages
snair
New Member
New Member
Posts:


--
10 Feb 2005 02:12 PM
    Hi,

    I am trying to use the startup code available in the SDK-LH7A400 BSP in the sharp website with IAR as the compiler. Since the code supplied by Sharp isnt for IAR tool chain, I am wondering if anyone has made it to work with the kit. If so, could I please know what are the changes that need to be put in to accomodate the code in IAR.

    Thanks,
    Sajiv
    Anonymous
    Posts:


    --
    15 Feb 2005 12:19 PM
    Sajiv,

    Since no one has chimed in yet I thought I'd add a post to this thread. Your best bet is probably going to be be to go through Sharp's support department regarding that particular BSP.

    http://www.sharpsma.com/sma/support/index.htm

    If you're looking to just have a WinCE Platform to application development on I'd recommending using one of Logics Sample NK.BINs. These can be found under the "Sample WinCE Images" category of the all downloads page.

    http://www.logicpd.com/auth/downloads/LH7A400/

    Regards,
    snair
    New Member
    New Member
    Posts:


    --
    18 Feb 2005 12:15 PM
    Hi Aaron,

    Thank you very much for the info. I was able to get the related linker symbols that could be used in a C file, this was required for the SDRAM intialization process.

    Once again, thank you...

    Regards,
    Sajiv

    Forums NXP SOMs and Development Kits LH7A400 Card Engine and Development Kit
    ---