ftiernan,
When you change the registry using the Remote Registry Editor, I'm guessing you are not using a 'hive' registry. That means any changes you make are lost when you do a power down, since they are just in RAM. If you want more info about the hive registry, check out our white paper on it use or the CE help.
In order to use display mode 6, in the driver, you are correct in that you must change the registry number. You can find this in the driver's .reg file. You must change the 'DisplayNumber' key to 6. The default is 5. Please be sure that when you change this and build you check your reginit.ini file to be sure you changes were copied into the release folder. This file is located in your project's release folder, in the Public folder (WinCE 4.2).
There is one other option you can use. When you provide the boot string when jumping to CE from LogicLoader, you can use the 'disp_num:6' boot string to over-write the value built into the image's registry.
Both of these items our documented in the driver's .reg file and release notes if you need more information. Information about boot strings can be found in the LoCE BSP user notes which should be provided with the latest OAL release.
Hope this helps,
-Mike A.
|