We are trying to deploy our vs .NET 2003 application on the WinCE 4.2 .NET platform on logic
pd LH7A400-10 SDK system. The device connects successfully with active sync 3.5 and platform
builder KITL. However, the .NET deployment is resulting an error
------ Deploy started: Project: SmartDeviceApplication1, Configuration: Release Windows CE ------
Deploying to Windows CE .NET Device using TCP Connect Transport
Error: Cannot establish a connection. Be sure the device is physically connected to the development computer.
---------------------- Done ----------------------
Build: 1 succeeded, 0 failed, 0 skipped
Deploy: 0 succeeded, 1 failed, 0 skipped
We have tried the smart device authentication utility on the device side, it gives
the IP address as 192.168.55.101. We have put this address in the smart device authentication utility
on host end and it is returning an error
Device IP address not found. Run the device component of this utility to find the IP addresses of the device
The device shows that it is connected @ 19200.
Our platform settings are as follows :
BSP selected LoCE_A400_REL_101
Configuration Custom
Custom Device Device with shell and GUI
Applications and services C libraries and run time
C++ exception handling
.NET Compact framework
Applications Active Sync
Communication services and networking
Networking Wide area network, Dial up networking( RAS/PPP )
TAPI 2.0
Internet client services Internet explorer HTML/DHTML API
Security Cryptography services
User Interface Network user interface, Touch display
Notification acknowledged
The Losh bootscript was as follows :
exec :A400_UART:dbg_enet:91C111:dbg_enet_base:0x70000000:dbg_enet_irq:0x00000007:rtc:rtc_a400_int:share_eth:1:disp_num:9
|