|
|
|
|
|
|
0 Replies and 1661 Views
Improve WinCE touch double-tap on LCD-10.4-VGA-10 1661 0
Started by Anonymous
Two touch screen calibration registry entries are designed to improve LCD touch screen tap sensivity.
These entries should be made a part of the lpd_LH7A400_Touch.reg file under - &91HKEY_CURRENT_USER\ControlPanel\Pen&93
'DblTapDist' = dword: 14
'DblTapTime' = dword: FA
The lpd_LH7A400_Touch.reg file should be located in the WinCE420\PUBLIC\lpd_Drivers folder. Select the appropriate .reg file.
The calibration can also be performed using the Remote Registry Editor under the Tools tab of Pla...
|
|
|
|
0 |
1661 |
05 Jan 2004 03:50 PM |
|
2 Replies and 1494 Views
Truble Using Embedded Visual C 4 1494 2
Started by Bob Carleone
Hello all,
Is there anyone with insight on how to use embedded Visual C 4 to debug an application
I checked with the Microsoft Documentation any I think we are approaching it correctly.
We connect using platform manager and use platform manager's connection to communicate.
We can connect to the Zoom from VC but when we build the app it(VC) tries to download the file and we get an error that means the platform is incompatible. We tell VC to continue anyway it copies the executable to the targe...
|
|
|
|
2 |
1494 |
by vindag 23 Dec 2003 08:55 AM |
|
5 Replies and 1877 Views
Trouble Building_a_Webserver_with_the_LoCE_BSP.pdf 1877 5
Started by cborax
Greetings,
Has anyone had trouble with the white paper 'Building_a_Webserver_with_the_LoCE_BSP.pdf' on the SDK-LH7A400-10 .
The 'losh> ifconfig sm0 dhcp' does work and the board does respond to a ping before I load CE.
Once CE.NET 4.20 boots the board won't respond to a ping or my HTML browser .
TELNETD won't start either.
The only discrepancy I noticed is that
losh> ifconfig reports :sm0: up 100M half-duplex (415)
but the figure 18 in the pdf shows 100Mbits full-duplex
Any sugge...
|
|
|
|
5 |
1877 |
by cborax24 Nov 2003 07:48 AM |
|
0 Replies and 1609 Views
serial_eeprom and boot script not functioning properly 1609 0
Started by Anonymous
If the boot script does not appear to be functioning properly, first view the serial_eeprom to verify the script has been entered correctly. The serial_eeprom contents can be viewed using the following command (Refer to Logic Loader User Manual for more information).
Loading consecutive boot scripts into the serial_eeprom through LoLo has been shown to corrupt the boot script. The first script is loaded immediately in front of the second, hence LoLo doesn't know where the first ends and the s...
|
|
|
|
0 |
1609 |
20 Nov 2003 02:45 PM |
|
5 Replies and 1553 Views
How to configure ADS1.2 for developping application software 1553 5
Started by Deleted User
We are trying to develop application software in ADS1.2 environment, and also we want remain BoLo and LoLo in LH7A400_10, just like the sample_zoom_app which LogicPD provides, but defferenc is: sample_zoom_app must be compiled in GNU CygWin environment.
Please give some tips how to configure ADS1.2.
Thanks!
John
|
|
|
|
5 |
1553 |
by Deleted User19 Nov 2003 02:34 PM |
|
4 Replies and 1452 Views
Internet Explorer 6.0 platform 1452 4
Started by Deleted User
We are trying to build Internet Explorer 6.0 platform. After it has been built, only the website - 'www.tsanet.org' can be accessed. Sometimes the website - 'www.msn.com' can also be accessed, but we must not select the feature of 'display images in pages' in 'internet option' settings. Others, we have tried to browse tens of websites, none of them can be accessed. What should I do
Thanks,
John
|
|
|
|
4 |
1452 |
by Deleted User18 Nov 2003 03:32 PM |
|
0 Replies and 1606 Views
Toggling Slow Peripherals Chip Select 6 lines 1606 0
Started by Anonymous
The LH7A400-10 IO Controller Spec provides instructions for using the Slow Peripherals Chip Select 6 (CS6) area: CompactFlash (CF), ISA-like BUS, Reserved On and Off board memory blocks, and open memory blocks.
As the IO Controller Spec states, the address range of this area is 0x6000 0000 - 0x63FF FFFF. The CPLD decodes processor address lines uP_MA21-uP_MA25 into SLOW_nCS, CF_nCE, and nAEN.
The decoding process takes:
ISA address range --> nAEN line will toggle
Compact Flach address...
|
|
|
|
0 |
1606 |
10 Nov 2003 01:24 PM |
|
3 Replies and 1470 Views
Resetting Platform Builder 1470 3
Started by Deleted User
Why do I need to do this between downloads
Can I do anything about it
Thanks,
Marc
|
|
|
|
3 |
1470 |
by 23 Oct 2003 11:39 AM |
|
|
4 |
1435 |
by Deleted User20 Oct 2003 02:19 PM |
|
3 Replies and 1627 Views
Problems downloading CE image 1627 3
Started by Deleted User
After manually setting my IP address and issuing the BOOTME & command, the download dies at arbitrary places. The errors from LOLO are:
Timeout Trying to Allocate for Send
MIR_REG: 0x4
INTERRUPT_REG: 0xb115
CPLD MASK REG: 0x840e
Was allocating 0x34 bytes
I get the above a number of times before getting the message below:
section 2: phy_addr: 0xc00e1000 phy_len: 0x0009f920 cksum: 0x03b3de1c
section 2: unable to read (-1) (11)
BOOTME: error loading
It does occasionally work and whe...
|
|
|
|
3 |
1627 |
by Deleted User09 Oct 2003 04:22 PM |
|
1 Replies and 1451 Views
Bad serial eeprom? 1451 1
Started by Deleted User
Yes, it's me again. Still tracking down whatever.
Here's a trace of a couple of losh commands:
losh> hd /dev/serial_eeprom
0xc003d88c 65 78 65 63 20 64 62 67 5f 73 65 72 69 61 6c 3a exec dbg_serial&58;
0xc003d89c 41 34 18 30 5f 55 41 52 54 3a 64 62 67 5f 65 6e A4&46;0_UART&58;dbg_en
0xc003d8ac 65 74 10 39 31 43 31 31 31 3a 64 62 67 5f 65 6e et&46;91C111&58;dbg_en
0xc003d8bc 65 74 5f 62 61 73 65 3a 30 78 37 30 30 30 30 30 et_base&58;0x700000
0xc003d8cc 30 30 3a 72 74 63 3a 72...
|
|
|
|
1 |
1451 |
by 07 Oct 2003 08:51 AM |
|
0 Replies and 1683 Views
Unable to get DHCP-based IP address 1683 0
Started by Deleted User
I'm following the Quick Start guide for the WinCE BSP, and I execute
the following Losh (1.2.2) command 'ifconfig sm0 dhcp'.
When I check my Redhat 6.0 server, I am receiving the dhcp request and sending an ACK for the appropriate IP address, yet the board never seems to accept it. I do have a couple of switches in the loop as well.
When I manually set the IP address, all seems to work pretty well, although the IP connectivity seems a little iffy at times.
Any suggestions
Thanks,
Marc
|
|
|
|
0 |
1683 |
06 Oct 2003 02:43 PM |
|
4 Replies and 1566 Views
Deploying from Visual Studio.Net 2003 via ActiveSync? 1566 4
Started by skochan
Anyone,
I wish to start development wih VS.Net 2003 using ActiveSync to deploy. So far I have successfully created a Mobile Handheld device with the 12.1' display and graphical shell (release - no debug) - no problem. I've added the ActiveSync, KITL, and TCP/IP Transport features to the build. In addition, I've edited the lpd_LH7A400_USBF_beta_001.reg file to 'StartRepllog'=dword:1. What appears to happen is that the Repllog crashes silently even when run manually from Platform Builder. On...
|
|
|
|
4 |
1566 |
by skochan01 Oct 2003 09:37 AM |
|
0 Replies and 1771 Views
Using the WinCE LCD controller device driver. 1771 0
Started by Deleted User
All,
Several people have contacted Logic wondering about using the LoCE BSP to build a Windows CE image which includes a display and graphical shell. I am currently working on several white papers that cover building various configurations of the CE operating system. I hope to have these up and posted in the next couple of days. However, for those of you who wish to move ahead with development, please follow these instructions:
The key to getting the display driver to work correctly lies withi...
|
|
|
|
0 |
1771 |
19 Sep 2003 02:09 PM |
|
0 Replies and 1688 Views
WinCE Ethernet Download to kit without Local Area Network 1688 0
Started by Anonymous
You don't need to have a DHCP-server/LAN combination in order to use the Zoom Starter Kit's Ethernet connection. For example, if the evaluation unit is connected to a Windows 2000 workstation that is not connected to the LAN. You can use an Ethernet cross-cable to connect the kit directly to your workstation. To do this, give your workstation a static IP address using the Windows 'Network Connections' control panel applet. Then connect the Card Engine to your workstation with the Ethernet cross-...
|
|
|
|
0 |
1688 |
16 Sep 2003 07:53 AM |
|
0 Replies and 1895 Views
ARM-elf or Greenhill-elf downloads 1895 0
Started by Anonymous
The following question was submitted by hansr to the LH79520-10 site. It applies to the LH7A400-10 as well. Refer to the LH79520-10 post for original.
question: How do I get elf files generated by ARM or Greenhill tools to download to the development kit
Answer:
The ELF loader needs to know the address in memory where it should
place the incoming binary file. The Greenhill and ARM tools place this
information at the very end of an ELF file. When downloading over a
non-random access dev...
|
|
|
|
0 |
1895 |
11 Sep 2003 08:07 AM |
|
0 Replies and 1658 Views
reading and writing to user area of Fast Peripherals Chip Se 1658 0
Started by Anonymous
Question:
I was planning to look at the timing characteristics of the external memory I/O by writing a small piece of assembly code to read and write to the user area of the Fast Peripherals Chip Select. I modified the 'hello' example to read and write to address 0x73000000 which is defined in the IO controller Interface Specification on the installation CD.
However, the LogicLoader produces an 'everything went wrong' screen when I do a 'jump' to the code.
Is this address correct
Is the C...
|
|
|
|
0 |
1658 |
10 Sep 2003 09:30 AM |
|
1 Replies and 1533 Views
Problem bringing up Bootloader: Alpha characters fill screen 1533 1
Started by Anonymous
The J6 JTAG jumpers need to be configured correctly for LH7A400-10 SDK normal operation.
The position for normal operation is detailed in the Quickstart guide (figure 3.3).
J6.1.3.5 and J6.2.4.6 should both be
If the JTAG Jumpers are not configured correctly the user will see alpha characters fill up their terminal screen.
Andrew Wawra
Tech Support
Logic Product Development.
|
|
|
|
1 |
1533 |
by Deleted User08 Sep 2003 12:50 PM |
|
|
1 |
1509 |
by 01 Aug 2003 12:27 PM |