Quote:
Modify the "Platform Settings" to select the "Write Run-time image to flash" from the build options tab.
This is actually incorrect. You may be building an XIP image that runs out of Flash as it probably takes preference over LOCE_RELOCATE_FROM_FLASH. You see, when you select 'Write Run-Time image to flash', you are setting the envrionment variable IMGFLASH to 1. IMGFLASH and LOCE_RELOCATE_FROM_FLASH are mutually exclusive. One builds an image that is burned into Flash, but is XIP (runs in Flash), the other (which is specific to Logic's BSP) builds an image that is burned into Flash, but copies itself to RAM at boot time.
Hope this clears things up. Please check out our BSP User Guide:
http://www.logicpd.com/do...4/70000143_Rev_D.pdf
(Section 4.1 discusses the image types)
(Section 5.3 discusses how to launch the different image types)
Thanks,
-Mike