Go to previous topic
Go to next topic
Last Post 18 May 2009 03:57 PM by  jdkuo@multibeamcorp.com
Porting QNX to MPC8360E-RDK
 1 Replies
Author Messages
classicajain
New Member
New Member
Posts:


--
18 May 2009 12:02 PM
    I am using QNX RTOS for our MDS8360E-RDK target. QNX has its own BSP for MPC8360E-MDS. The thing is the memory map is not the same. I will very appreciate if you could give me some suggestions and show me how to port QNX BSP code from MPC8360E-MDS to MPC8360-RDK. I am not familiar with the board bringup though.

    Thanks,
    Jew-Dong
    jdkuo@multibeamcorp.com
    New Member
    New Member
    Posts:


    --
    18 May 2009 03:57 PM
    Hi everyone,

    I have downloaded ltib-mpc8360-com-express-20080709.iso (MPC8360E-RDK Linux BSP) from

    http://support.logicpd.co...h/downloads/MPC8360/

    and created a CD-rom. I will very appreciate if anyone could point me to the right place for matching memory mapping in the boot code with the physical hardware so that I can port QNX RTOS over. I am not familiar with bringing up target system.

    Thank you very much!
    Jew-Dong


    ---