Search

Technical Discussion Group Forum

This forum is provided for user discussion. While Beacon EmbeddedWorks support staff and engineers participate, Beacon EmbeddedWorks does not guarantee the accuracy of all information within in the Technical Discussion Group (TDG).

The "Articles" forums provide brief Articles written by Beacon EmbeddedWorks engineers that address the most frequently asked technical questions.

To receive email notifications when updates are posted for a Beacon EmbeddedWorks product download, please subscribe to the TDG Forum of interest.

TDG Forum

PrevPrev Go to previous topic
NextNext Go to next topic
Last Post 05 Jan 2007 09:38 AM by  richh@logicpd.com
Need to remove U14 pin 4 when using I2C on the EVB
 0 Replies
Sort:
You are not authorized to post a reply.
Author Messages
richh@logicpd.com
New Member
New Member
Posts:52


--
05 Jan 2007 09:38 AM
    Hello,
    If you plan to use I2C on your EVB, you first must remove U14 pin 4. The CAN and I2C interfaces on the MCF5329 share the same pins, and are muxed together on MFP16/23 and MFP17/24
    You are not authorized to post a reply.