I'm trying to connect a BDI3000 to the i.MX27 LITEKIT. I have two kits and the first kit I successfully installed u-boot at 0xC000_0000. The second kit will not boot so I'm trying to connect the BDI3000 so I can program the flash.
I'm getting a JTAG exists failed error
- TARGET: processing reset request
- TARGET: BDI asserts TRST and RESET
- TARGET: BDI removes TRST
- TARGET: Bypass check 0x00000001 => 0x00000002
- TARGET: JTAG exists check failed
- TARGET: Remove RESET and try again
- TARGET: BDI waits for RESET inactive
- TARGET: Bypass check 0x00000001 => 0x00000002
- TARGET: JTAG exists check failed
# TARGET: resetting target failed
# JTAG: communication with target failed
- TARGET: target will be restarted in 10 sec
I've checked all the cables, connections, etc. All that is okay. I tryed all the setting on JP2 also with the same result.
Any suggestions where to look?
Thanks
|