Quote:
losh> exec dbg_serial:IMX27_UART:rtc:rtc_imx27:dbg_leds:1:disp_num:5:
Windows CE Kernel for ARM (Thumb Enabled) Built on Nov 24 2008 at 14:58:01
INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0xb
LoLo Parameter: dbg_serial:IMX27_UART:rtc:rtc_imx27:dbg_leds:1:disp_num:5::ip_ad
dr:19216821326
Power on Reset - Clear RAM
SW1A voltages: 0x1c71c (normal = 28, DVS = 28, standby = 28)
SW1A configuration: 0x221605 (mode = 1, standby mode = 1, DVS speed = 0, panic =
0, soft start = 1)
OEMInit: Updating CSCR from 0x33230107 to 0x33238107 ...
OEMInit: Updated CSCR to 0x33238107
DeviceId................. LoCE_63677
pArgs->flags............. 0x0
pArgs->devLoc.IfcType.... 0
pArgs->devLoc.LogicalLoc. 0x1002B000
pArgs->devLoc.PhysicalLoc 0x1002B000
pArgs->devLoc.Pin........ 0
pArgs->ip4address........ 1
pDevice->Name............ s
pDevice->ifcType......... 0
pDevice->id.............. 0x1002B000
pDevice->resource........ 0
pDevice->type............ 2
pDevice->pDriver......... 0x81299000
WARN: OALKitlInit: KITL Disabled
From 1980 to 2158
OALIoCtlHalGetHiveCleanFlag(HIVECLEANFLAG_SYSTEM)+
Disable "COM1:" driver
HCD driver DLL attach
EHCD!HCD_Init
HCD driver DLL attach
EHCD!HCD_Init
VBridge:: VB_INITIALIZED returns [0]
UfnPdd_InitEndpoint: 0 Attrib(0)
PwrMonThread: PBT_POWERINFOCHANGE
PwrMonThread: AC line status 255, battery flag 255, backup flag 255, -1 levels
Boot string 'lcdcinit' present but clear, display driver will initialize LCD
Boot string calls for display: 5
Over-riding registry setting of 1.
Boot string 'lcdcinit' present but clear, display driver will initialize LCD
Boot string calls for display: 5
Over-riding registry setting of 1.
Security Violation: Call Forward NOT SUPPORTED
Failure to suspend the port, there must be something happening
Receive interrupt with OTGSC (0x1200120) USBSTS (0x80), PORTSC (0x8c001804), USB
CTRL (0x59484030)