Hi,

I loaded linux-2.6.22-mx27litekit.patch from http://200dollartablet.blogspot.com/ I then installed the sources from the compressed tar image linux-2.6.22.tar.gz included in the mx27ads ltib bsp. Applied the patches and attempted to build it using the ltib command line:

ltib -p kernel --configure

but I got the following errors

drivers/built-in.o: In function `write_irq':
hid-input.c:(.text+0x379ec): undefined reference to `cs8900_irq_map'
drivers/built-in.o: In function `cs89x0_probe1':
hid-input.c:(.init.text+0x2d74): undefined reference to `cs8900_irq_map'
drivers/built-in.o: In function `cs89x0_probe':
hid-input.c:(.init.text+0x2ea4): undefined reference to `netcard_portlist'
make: *** [.tmp_vmlinux1] Error 1
error: Bad exit status from /home/tbono/ltib/tmp/rpm-tmp.58948 (%build)


RPM build errors:
Bad exit status from /home/tbono/ltib/tmp/rpm-tmp.58948 (%build)
Build time for kernel-2.6.22-mx: 382 seconds

I then changed the arch/arm/mach-mx27/mx27ads.c file to include the code to define these that I found in arch/arm/mach-mx27/mx27ads.c.bak. This allows the kernel to build but it doesn't seem to boot. It will uncompress and appear to hang which I assume is a console problem. I wondering if I'm missing an additional patch that fixes the 2 errors that I'm seeing or did I apply the linux-2.6.22-mxlitekit.patch to the wrong image?

Thanks