Quote:
Linux version 2.6.27-rc3 (yin@vr8) (gcc version 4.2.1) #11 PREEMPT Tue Aug 19 17:16:01 CEST 2008
CPU: ARM926EJ-S [41069264] revision 4 (ARMv5TEJ), cr=00053177
Machine: Freescale i.MX27ADS
Memory policy: ECC disabled, Data cache writeback
BUG: mapping for 0xd4000000 at 0xeb000000 overlaps vmalloc space
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
Kernel command line: console=ttymxc0,115200 root=/dev/mtdblock1 init=/sbin/init
MXC GPIO hardware
MXC IRQ initialized
PID hash table entries: 512 (order: 9, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 128MB = 128MB total
Memory: 127728KB available (1836K code, 123K data, 68K init)
Calibrating delay loop... 132.71 BogoMIPS (lpj=663552)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 288 bytes
NET: Registered protocol family 16
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
yaffs Aug 19 2008 17:15:00 Installing.
msgmni has been set to 249
io scheduler noop registered (default)
Serial: IMX driver
imx-uart.0: ttymxc0 at MMIO 0x1000a000 (irq = 20) is a IMX
console [ttymxc0] enabled
imx-uart.1: ttymxc1 at MMIO 0x1000b000 (irq = 19) is a IMX
imx-uart.2: ttymxc2 at MMIO 0x1000c000 (irq = 18) is a IMX
imx-uart.3: ttymxc3 at MMIO 0x1000d000 (irq = 17) is a IMX
imx-uart.4: ttymxc4 at MMIO 0x1001b000 (irq = 49) is a IMX
imx-uart.5: ttymxc5 at MMIO 0x1001c000 (irq = 48) is a IMX
physmap platform flash device: 00200000 at c0000000
physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x0035
Using auto-unlock on power-up/resume
cfi_cmdset_0001: Erase suspend on write enabled
RedBoot partition parsing not available
Using physmap partition information
Creating 2 MTD partitions on "physmap-flash.0":
0x00000000-0x00040000 : "LoLo Bootloader"
0x00040000-0x00050000 : "Bootloader config"
MXC MTD nand Driver 2.0
It seems that the NAND on MX27Litekit is not compatible with MX27ADS Nand driver. Does anyone know the exact driver of the NAND and where can we get it? Thanks a lot.