Hi, I have a Linux XIP (Execute In Place) image built that I like to burn into flash at offset 0xc0000 in NOR flash memory space. Here is what I have done:

load raw 0xa0400000 1327892 /tftp/192.168.1.109:xipImage /* load Linux image into DRAM at offset 4MB in ram space */
burn /dev/flash0 B12 /* Burn the image into flash starting at block 12, which is 0xc0000 offset */

However when I do 'x /w 0xc00c0000', the flash memory contents are all zeros.

I am suspecting that the burn commands grabbed the wrong contents to burn into flash.

Can someone help?

Thanks