Go to previous topic
Go to next topic
Last Post 07 Jun 2008 09:30 AM by
juanluna
DI Display 3 Time Configuration Register
2 Replies
Author
Messages
juanluna
New Member
Posts:
03 Jun 2008 03:25 PM
Hi guys,
I dont understand DI_DISP3_TIME_CONF, (what does DISP3_IF_CLK_PER_WR mean, and its purpose). I am setting a new custom display, but I dont know how to set the right value for the Display clock.
Can somebody help me ?
priyanka
New Member
Posts:
06 Jun 2008 11:04 PM
HI!!!
I have just started working with litekit.Even I have the same problem. When I configure for 640x480( as shown in the app notes 298), and do 'config v test' , I see the registers and their values. Are these the only registers for that configuration that need to be written?
Please help!!
juanluna
New Member
Posts:
07 Jun 2008 09:30 AM
I have solved the problem!! Almost all TFT LCD displays have similar characteristics, and I changed only one registry. It was a polarity for a Control Signal. It was really simple. Most important is to watch the manual for the LCD and also for processor.
Thank you. Good luck!
Forums
Freescale / NXP SOMs and Development Kits
i.MX31 LITEKIT Development Kit