init:214
flushing D cache.
flushing I cache.
flushing tlb
flushing D cache.
flushing I cache.
flushing D cache.
flushing I cache.
enabling cache.
add-yaffs: inserted: start 0 - len 4095
Mounting a YAFFS partition.

---------------------------------------------------
Starting YAFFS file system:
Current YAFFS partition table:
0: /dev/nand0 boot B0 - B4095 ( 0)
1: <NULL> <NULL>
2: <NULL> <NULL>
3: <NULL> <NULL>
YAFFS initialized.
---------------------------------------------------

yaffs: 4 blocks are marked for retirement
yaffs: this can be due to improperly unmounting YAFFS
loading from /boot/eboot.nb0:
loading raw binary to 0x80040000 (ram) len 00040000:
................................file loa??R?W
W-?]K???NFO:OALLogSetZones:
g_oalLogMask: 0xb
INFO: PBC Version = n/a

Microsoft Windows CE Ethernet Bootloader Common Library Version 1.1 Built Sep 22
2006 10:23:42
Copyright 2006 Logic Product Development, Inc. All Rights Reserved
Microsoft Windows CE Ethernet Bootloader 0.1 for MX31 ADS (Sep 22 2006 16:43:07)
PBC debug switch settings: 0x0
BSP System Configuration:
L2 CACHE ENABLED
MCU PLL = 532000000 Hz
USB PLL = 240000000 Hz
SER PLL = 220147200 Hz
ARM CLOCK = 266000000 Hz
IPU CLOCK = 133000000 Hz
AHB CLOCK = 133000000 Hz
IPG CLOCK = 66500000 Hz
NFC CLOCK = 22166666 Hz
GACC CLOCK = 66500000 Hz
PER CLOCK = 66500000 Hz
SSI1 CLOCK = 1719900 Hz
SSI2 CLOCK = 1719900 Hz
FIRI CLOCK = 1875000 Hz
CSI CLOCK = 429975 Hz
USB CLOCK = 60000000 Hz
SIM CLOCK = 66500000 Hz
INFO: InitTimer() initialize debug wait timer.
InitTimer() pre-reset....
InitTimer() post-reset....
InitTimer() test 2 second wait....
InitTimer() post wait....
Hit ENTER within 3 seconds to change boot setting!
InitEthDevice+
IOBase 0xb4100000
MemoryBase 0xb4021000
OEMEthHardwareInit() initializing Ethernet controller.
LAN9118: reset chip start...
LAN9118: reset chip done...
LAN9118: Chip Id 117 Revision 1
LAN9118: reset PHY start...
LAN9118: reset done...
LAN9118: Auto-negotiation start...
Auto Negotiation done
LAN9118: Link is 100 Mbps full-duplex...
-LAN91CInit(mac = 00:12:33:55:cc:aa, rc = 1)
System ready!
Preparing for download...
OEMPreDownload: Device Name 'MX3152394'
OEMPreDownload: Clearing DHCP flag
OEMPreDownload: pBSPArgs->kitl.flags = 00000019
+EbootSendBootmeAndWaitForTftp
Sent BOOTME to 255.255.255.255
Sent BOOTME to 255.255.255.255