Search

Technical Discussion Group Forum

This forum is provided for user discussion. While Beacon EmbeddedWorks support staff and engineers participate, Beacon EmbeddedWorks does not guarantee the accuracy of all information within in the Technical Discussion Group (TDG).

The "Articles" forums provide brief Articles written by Beacon EmbeddedWorks engineers that address the most frequently asked technical questions.

To receive email notifications when updates are posted for a Beacon EmbeddedWorks product download, please subscribe to the TDG Forum of interest.

TDG Forum

PrevPrev Go to previous topic
NextNext Go to next topic
Last Post 30 Sep 2007 02:51 AM by  johnson@ultra-view.net
Help - New I.MX31 - Where's the LoLo?
 0 Replies
Sort:
You are not authorized to post a reply.
Author Messages
johnson@ultra-view.net
New Member
New Member
Posts:


--
30 Sep 2007 02:51 AM
    init:214
    flushing D cache.
    flushing I cache.
    flushing tlb
    flushing D cache.
    flushing I cache.
    flushing D cache.
    flushing I cache.
    enabling cache.
    add-yaffs: inserted: start 0 - len 4095
    Mounting a YAFFS partition.

    ---------------------------------------------------
    Starting YAFFS file system:
    Current YAFFS partition table:
    0: /dev/nand0 boot B0 - B4095 ( 0)
    1: <NULL> <NULL>
    2: <NULL> <NULL>
    3: <NULL> <NULL>
    YAFFS initialized.
    ---------------------------------------------------

    yaffs: 4 blocks are marked for retirement
    yaffs: this can be due to improperly unmounting YAFFS
    loading from /boot/eboot.nb0:
    loading raw binary to 0x80040000 (ram) len 00040000:
    ................................file loa??R?W
    W-?]K???NFO:OALLogSetZones:
    g_oalLogMask: 0xb
    INFO: PBC Version = n/a

    Microsoft Windows CE Ethernet Bootloader Common Library Version 1.1 Built Sep 22
    2006 10:23:42
    Copyright 2006 Logic Product Development, Inc. All Rights Reserved
    Microsoft Windows CE Ethernet Bootloader 0.1 for MX31 ADS (Sep 22 2006 16:43:07)
    PBC debug switch settings: 0x0
    BSP System Configuration:
    L2 CACHE ENABLED
    MCU PLL = 532000000 Hz
    USB PLL = 240000000 Hz
    SER PLL = 220147200 Hz
    ARM CLOCK = 266000000 Hz
    IPU CLOCK = 133000000 Hz
    AHB CLOCK = 133000000 Hz
    IPG CLOCK = 66500000 Hz
    NFC CLOCK = 22166666 Hz
    GACC CLOCK = 66500000 Hz
    PER CLOCK = 66500000 Hz
    SSI1 CLOCK = 1719900 Hz
    SSI2 CLOCK = 1719900 Hz
    FIRI CLOCK = 1875000 Hz
    CSI CLOCK = 429975 Hz
    USB CLOCK = 60000000 Hz
    SIM CLOCK = 66500000 Hz
    INFO: InitTimer() initialize debug wait timer.
    InitTimer() pre-reset....
    InitTimer() post-reset....
    InitTimer() test 2 second wait....
    InitTimer() post wait....
    Hit ENTER within 3 seconds to change boot setting!
    InitEthDevice+
    IOBase 0xb4100000
    MemoryBase 0xb4021000
    OEMEthHardwareInit() initializing Ethernet controller.
    LAN9118: reset chip start...
    LAN9118: reset chip done...
    LAN9118: Chip Id 117 Revision 1
    LAN9118: reset PHY start...
    LAN9118: reset done...
    LAN9118: Auto-negotiation start...
    Auto Negotiation done
    LAN9118: Link is 100 Mbps full-duplex...
    -LAN91CInit(mac = 00:12:33:55:cc:aa, rc = 1)
    System ready!
    Preparing for download...
    OEMPreDownload: Device Name 'MX3152394'
    OEMPreDownload: Clearing DHCP flag
    OEMPreDownload: pBSPArgs->kitl.flags = 00000019
    +EbootSendBootmeAndWaitForTftp
    Sent BOOTME to 255.255.255.255
    Sent BOOTME to 255.255.255.255
    You are not authorized to post a reply.