Search

Technical Discussion Group Forum

This forum is provided for user discussion. While Beacon EmbeddedWorks support staff and engineers participate, Beacon EmbeddedWorks does not guarantee the accuracy of all information within in the Technical Discussion Group (TDG).

The "Articles" forums provide brief Articles written by Beacon EmbeddedWorks engineers that address the most frequently asked technical questions.

To receive email notifications when updates are posted for a Beacon EmbeddedWorks product download, please subscribe to the TDG Forum of interest.

TDG Forum

PrevPrev Go to previous topic
NextNext Go to next topic
Last Post 25 Jun 2007 12:34 PM by  richard.laborde@logicpd.com
JTAG on the i.MX31 with the Macraigor RAVEN
 0 Replies
Sort:
You are not authorized to post a reply.
Author Messages
richard.laborde@logicpd.com
Basic Member
Basic Member
Posts:247


--
25 Jun 2007 12:34 PM
    A customer sent in the following help for those of you that are using the Macraigor RAVEN.

    *******

    Run Macraigor's JTAGScanChainAnalyzer.exe, set the JTAG device and port, and hit analyze. Four devices are found when SJC_MOD is low.

    Instructions to setup the CONNection in the OCDCommander.

    The chain consists of :
    1) OTHER JTAG DEVICE Scan length = 4
    2) Freescale MX31
    3) OTHER JTAG DEVICE Scan Length = 4
    4) OTHER JTAG DEVICE Scan Length = 5

    The chain is found and the OCDCommander is able to control the processor.

    *******

    Thanks
    You are not authorized to post a reply.