I have the same reaction with the 12.1 image.
Tom
Posted By spewl on 28 Dec 2006 1:45 PM
I am having problems getting this new sample to work. The older one works fine. here is what I am seeing.
losh> load bin NK.BIN
loading from NK.BIN:
R
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
................................................................................
.
image launch addr: 0x80301000
Verifying checksums: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
Checksums good.
file loaded
losh> exec
INFO:OALLogSetZones: g_oalLogMask: 0xb
Windows CE Kernel for ARM (Thumb Enabled) Built on Jun 24 2004 at 18:25:00
ProcessorType=0b36 Revision=4
sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 88301440
OEMInit(MX31): SREV = 0x12
OEMInit(MX31): (DEBUG_PORT == DBG_UART1)
OEMInit(MX31): PLAT_PMC not defined
PBC debug switch settings: 0x0
BSP System Configuration:
L2 CACHE ENABLED
MCU PLL = 532000000 Hz
USB PLL = 240000000 Hz
SER PLL = 220147200 Hz
ARM CLOCK = 266000000 Hz
IPU CLOCK = 133000000 Hz
AHB CLOCK = 133000000 Hz
IPG CLOCK = 66500000 Hz
NFC CLOCK = 22166666 Hz
GACC CLOCK = 66500000 Hz
PER CLOCK = 66500000 Hz
SSI1 CLOCK = 1719900 Hz
SSI2 CLOCK = 1719900 Hz
FIRI CLOCK = 1875000 Hz
CSI CLOCK = 429975 Hz
USB CLOCK = 60000000 Hz
SIM CLOCK = 66500000 Hz
OEMInit(MX31): L2 cache is enabled (AUXCR = 0x30024)
BSPIntrInit(): SKIPPING BSP_LAN9118_IRQ IRQ...
OEMInit() about to init timer...
OEMInit() post init timer...
SW1A voltages: 0x471c (normal = 28, DVS = 28, standby = 4)
SW1A configuration: 0x221605 (mode = 1, standby mode = 1, DVS speed = 0, panic =
0, soft start = 1)
OEMInit(MX31) SWITCHING TO HIGH SPEED ARM CLOCK = 532000000 Hz
+OALKitlStart(IMX31) ....
DUMP AVIC INTCNTL : 00000000
DUMP AVIC NIMASK : 0000001F
DUMP AVIC INTENNUM : 00000000
DUMP AVIC INTDISNUM : 00000000
DUMP AVIC INTENABLEH : 01180004
DUMP AVIC INTENABLEL : 10000000
DUMP AVIC INTTYPEH : 00000000
DUMP AVIC INTTYPEL : 00000000
DUMP AVIC NIPRIORITY7: 00000000
DUMP AVIC NIPRIORITY6: 00000000
DUMP AVIC NIPRIORITY5: 00000000
DUMP AVIC NIPRIORITY4: 00000000
DUMP AVIC NIPRIORITY3: 00000000
DUMP AVIC NIPRIORITY2: 00000000
DUMP AVIC NIPRIORITY1: 00000000
DUMP AVIC NIPRIORITY0: 00000000
DUMP AVIC NIVECSR : 001C0000
DUMP AVIC FIVECSR : FFFFFFFF
DUMP AVIC INTSRCH : 00020000
DUMP AVIC INTSRCL : 10000000
DUMP AVIC INTFRCH : 00000000
DUMP AVIC INTFRCL : 00000000
DUMP AVIC NIPNDH : 00000000
DUMP AVIC NIPNDL : 10000000
DUMP AVIC FIPNDH : 00000000
DUMP AVIC FIPNDL : 00000000
Sp=ffffc7cc
OEMIoControl: Unsupported Code 0x101008c - device 0x0101 func 35
OEMIoControl: Unsupported Code 0x10100cc - device 0x0101 func 51
OEMIoControl: Unsupported Code 0x1010024 - device 0x0101 func 9
OEMIoControl: Unsupported Code 0x10100d0 - device 0x0101 func 52
SDMA Memory Map: PA = 0x1fffd000, size = 4096 bytesHCD driver DLL attach
EHCD!HCD_Init
Port (0):ISP1504_WriteReg: ############ Error -- failed to write ULPI reg 5
Port (0):ISP1504_WriteReg: ############ Error -- failed to write ULPI reg 11
Port (0):ISP1504_WriteReg: ############ Error -- failed to write ULPI reg 11
Port (0):ISP1504_WriteReg: ############ Error -- failed to write ULPI reg 11
Port (0):ISP1504_WriteReg: ############ Error -- failed to write ULPI reg 11
Port (0):ISP1504_WriteReg: ############ Error -- failed to write ULPI reg 11
SDMA Memory Map: PA = 0x1fffd000, size = 4096 bytes
DDIPU_SDC GetModeFromRegistry: dwPanelNum:0x5 dwPanelType:0x5
m_dwPanelType: 5
m_pMode->modeId: 0
currentPanel -> NAME : Sap64VAPnlRsre ae
currentPanel -> TYPE : 5
LCDC Regs:
SDC_COM_CONF: 0x00000041
SDC_BG_POS: 0x00ba0022
SDC_HOR_CONF: 0xc3520000
SDC_VER_CONF: 0x060b0001
SDC_SHARP_CONF_1: 0x00000000
SDC_SHARP_CONF_2: 0x00000000
DI_DISP_IF_CONF: 0x00000000
DI_DISP_SIG_POL: 0x04000000
DI_D3_TIME_CONF: 0x02000050
currentPanel -> NAME : Sap64VAPnlRsre ae
currentPanel -> TYPE : 5
LCDC Regs:
SDC_COM_CONF: 0x00000041
SDC_BG_POS: 0x00ba0022
SDC_HOR_CONF: 0xc3520000
SDC_VER_CONF: 0x060b0001
SDC_SHARP_CONF_1: 0x00000000
SDC_SHARP_CONF_2: 0x00000000
DI_DISP_IF_CONF: 0x00000000
DI_DISP_SIG_POL: 0x04000000
DI_D3_TIME_CONF: 0x02000050
Running TouchCalibrate
OEMIoControl: Unsupported Code 0x1010024 - device 0x0101 func 9
OEMIoControl: Unsupported Code 0x1010024 - device 0x0101 func 9
At this point CE comes up but is locked up.