I used the kernel from:
https://omapzoom.org/gf/project/omapkernel/frs/?action=FrsReleaseView&release_id=138
And the prebuilt root filesystem from:
https://omapzoom.org/gf/project/minifs/frs/
I have used the 'omap_3430ldp_defconfig' configuration from the kernel package:
make CROSS_COMPILE=arm-none-linux-gnueabi- distclean
make CROSS_COMPILE=arm-none-linux-gnueabi- omap_3430ldp_defconfig
make CROSS_COMPILE=arm-none-linux-gnueabi- uImage
Everything goes smooth here. However, the kernel hangs up in 10 secons after booting.
It stops responding to ICMP as well. Just nothing, completely silent, without any messages.
My device is: LDP3430-VG1.0.0
Has anybody tried fresher kernels on the device? I am not even sure that the 'omap_3430ldp_defconfig' is correct for this device.
Following is the boot procedure log
OMAP34XX LAB # printenv
bootdelay=3
baudrate=115200
ipaddr=192.168.1.100
serverip=192.168.1.44
netmask=255.255.255.0
bootfile=3430
bootargs=console=ttyS2,115200n8 noinitrd mem=64M root=/dev/nfs rw nfsroot=192.168.1.44:/mnt/storage/omap_3430/rootfs,nolock,wsize=1024,rsize=1024 ip=dhcp
stdin=serial
stdout=serial
stderr=serial
ethaddr=00:08:EE:02:50:DF
Environment size: 328/131068 bytes
OMAP34XX LAB # tftpboot
LAN9x18 (0x92110000) detected.
Read mac address: 00:08:EE:02:50:DF
start Auto negotiation... (take ~2sec)
Auto negotiation complete, 100BaseTX, full duplex
TFTP from server 192.168.1.44; our IP address is 192.168.1.100
Filename '3430'.
Load address: 0x80000000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
####################################################
done
Bytes transferred = 1926748 (1d665c hex)
OMAP34XX LAB #bootm
...
Starting System Init for OMAP3430LAB
Release: 0.1
******************************************
Saving kernel ring buffer : OK
Mounting devpts : OK
Setting up networking
Configuring lo : OK
Configuring eth0 : OK - 192.168.1.100
Starting telnetd : OK
Starting syslogd : OK
Starting klogd : OK
Mounting filesystems : OK
Please press Enter to activate this console.
BusyBox v1.6.1 (2008-07-17 12:54:29 CDT) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
#
|