Go to previous topic
Go to next topic
Last Post 21 Feb 2010 10:56 PM by  sesha@insilica.com
System not booting - board debug
 2 Replies
Author Messages
sesha@insilica.com
New Member
New Member
Posts:


--
19 Feb 2010 01:56 AM
    Hi,

    We are tying to debug the system (Zoom-II + Debug board) which is not booting. This system was working previous because of ground impact, it stopped working. Only two LEDS on the debug board glows (LED2 and T2 CLKREQ) when powered on.

    Looking for some help/leads to get the system up and running.

    Thanks,
    richard.laborde@logicpd.com
    Basic Member
    Basic Member
    Posts:247


    --
    19 Feb 2010 12:22 PM
    Jdeziner -

    Have you opened the case to see if the SOM has separated from the baseboard? A 1.3mm Hex driver is required.
    sesha@insilica.com
    New Member
    New Member
    Posts:


    --
    21 Feb 2010 10:56 PM
    Yes the SOM is in tact. Mechanically everything seems okay.

    Appreciate if you can send board debug cheat sheet or manual.

    Thanks,
    jD

    Forums Texas Instruments SOMs and Development Kits OMAP34x-II Zoom Mobile Development Platform
    ---