Go to previous topic
Go to next topic
Last Post 05 Oct 2011 04:47 PM by  Jonno
Greeh Hills Integrity and Probe
 2 Replies
Author Messages
Jonno
New Member
New Member
Posts:


--
30 Sep 2011 02:48 PM
    Hi,

    I'm new to both Green Hills tools and this dev kit. There's a BSP from Green Hills for the OMAP35x-LogicPD, which I assumed should work on this dev board. Everything compiles but I can't attach the GHS JTAG probe without error (tried both USB and Ethernet connection to the probe).

    When I try to connect I get the following messages. Any ideas?


    Script O:\OS\INTEGRITY\int1002\omap35x-logicpd\omap35x-logicpd.mbs:7
    Failed executing setup script!
    load: Download failed.
    Green Hills Probe error 10 (timeout):
    ERROR 10 (timeout) (coresight.c#116) {e}: Performing DPACC operation, DPACC[2:0] = ?
    richard.laborde@logicpd.com
    Basic Member
    Basic Member
    Posts:247


    --
    05 Oct 2011 10:09 AM
    Sorry Jonno, I'm not familiar with the GHS probe. Do you need to set the boot dip switches differently to use the probe? GHS should have that in their documentation...
    Jonno
    New Member
    New Member
    Posts:


    --
    05 Oct 2011 04:47 PM
    Hi,

    Thanks for the reply (I forgot I posted here). It turned out that the BSP I was using is not quite right for this dev kit. I managed to get everything talking now with the proper BSP in place.

    Jon

    Forums Texas Instruments SOMs and Development Kits AM3517 eXperimenter Kit
    ---