Go to previous topic
Go to next topic
Last Post 10 Oct 2010 07:53 PM by  Nathan.kuo
Bluetooth and WIFI on AM3517
 2 Replies
Author Messages
Nathan.kuo
New Member
New Member
Posts:


--
07 Oct 2010 02:03 AM
    HI

    I used the AM35x-OMAP35x-PSP-SDK-03.00.00.05 patces WILink 6 on AM3517 EVM

    I reference this document "1016614A_AM3517_EVM_WiLink_6-0_Getting_Started_Guide" to enable bluetooth and wifi

    But i execute hciattach tool to enable bluetooth will fail and wifi enable will fail , why?

    Another I have also the same MMC2 issue on AM3517.
    The interface MMC2 which using sdcard/sdio at boot and kernel can't work, but MMC1 does work functional.
    MMC2 is using through MMC slot on Application_Board. So about the h/w part, is there any configurations I need to set up for MMC2 ?
    How could I solve this problem?


    BT log
    root@am3517-evm:~# dbus-uuidgen --ensure
    root@am3517-evm:~# grep messagebus /etc/passwd
    messagebus:sXKqf3qGOIUHg:500:500:Linux User,,,:/home/messagebus:/bin/sh
    root@am3517-evm:~# adduser messagebus
    adduser: messagebus: login already in use
    root@am3517-evm:~# mkdir /var/run/dbus
    root@am3517-evm:~# dbus-daemon --system --fork
    root@am3517-evm:~# bluetoothd
    root@am3517-evm:~# echo 0 > /sys/class/gpio/gpio56/value
    root@am3517-evm:~# sleep 1
    root@am3517-evm:~# echo 1 > /sys/class/gpio/gpio56/value
    root@am3517-evm:~# hciattach -t 50 /dev/ttyS1 texas 3000000
    Found a Texas Instruments' chip!
    Firmware file : /lib/firmware/TIInit_7.2.31.bts
    Loaded BTS script version 1
    texas: changing baud rate to 3000000, flow control to 1
    ll_recv: Unknown HCI packet type ff
    Cannot send hci command to socket: Network is down
    Can't initialize device: Network is down

    root@am3517-evm:~# hciconfig hci0 -a
    Can't get device info: No such device

    WIFI log
    root@am3517-evm:~# ls
    bt wlan
    root@am3517-evm:~# cd wlan/
    root@am3517-evm:~/wlan# ls
    firmware.bin sta_run wlan_cu
    nvs_map.bin tiwlan.ini wpa_supplicant.txt
    sdio.ko tiwlan_drv.ko
    sta_rm tiwlan_loader
    root@am3517-evm:~/wlan# ./sta_run
    sdioDrv_init
    setting SDIO F&I clock Configuration
    done setting SDIO F&I clock Configuration
    TI WiLink 1271 SDIO: Driver loaded
    TI WLAN: driver loading
    hPlatform_Wlan_Hardware_Init
    wlan_muxcfg
    setting GPIO PMENA_GPIO[3]=1, LVLSHFTENA_GPIO[129]=0
    wifi_probe_irq
    wifi_probe_irq: got wlan irq 331
    wifi_probe_irq: got wlan irq trigger falling flag
    hPlatform_DevicePowerOff
    unplug_device
    hPlatform_initInterrupt
    IRQ= 331 FLAGS= 2
    TIWLAN: 3703.598357: pInitParams->RoamingScanning_2_4G_enable 0
    hPlatform_DevicePowerOn
    sdioDrv_WriteSyncBytes: tiwlan_sdio_probe not yet called
    sdioDrv_WriteSyncBytes: tiwlan_sdio_probe not yet called
    sdioDrv_WriteSync: tiwlan_sdio_probe not yet called
    sdioDrv_WriteSync: tiwlan_sdio_probe not yet called
    sdioDrv_WriteSync: tiwlan_sdio_probe not yet called
    sdioDrv_WriteSync: tiwlan_sdio_probe not yet called
    sdioDrv_WriteSync: tiwlan_sdio_probe not yet called
    sdioDrv_WriteSync: tiwlan_sdio_probe not yet called
    sdioDrv_WriteSync: tiwlan_sdio_probe not yet called
    TIWLAN: 3704.732576: CHIP VERSION... set 1273 chip top registers
    sdioDrv_WriteSync: tiwlan_sdio_probe not yet called
    sdioDrv_ReadSync: tiwlan_sdio_probe not yet called
    sdioDrv_DisableFunction: tiwlan_sdio_probe not yet called
    hPlatform_DevicePowerOff
    unplug_device
    Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0b412c
    Internal error: : 1028 [#1]
    last sysfs file: /sys/kernel/uevent_seqnum
    Modules linked in: tiwlan_drv sdio
    CPU: 0 Not tainted (2.6.32 #3)
    PC is at omap_hsmmc_status_notify_cb+0x7c/0x108
    LR is at omap_hsmmc_status_notify_cb+0x74/0x108
    pc : [<c028a4dc>] lr : [<c028a4d4>] psr: 20000013
    sp : cd9e5dc8 ip : c048bd71 fp : cfbcce14
    r10: cfbc9180 r9 : 0000000a r8 : cfbccf04
    r7 : 00000000 r6 : cf9c45c0 r5 : 00000000 r4 : 001dc000
    r3 : 0000000e r2 : fa0b4000 r1 : 00000000 r0 : 00000003
    Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user
    Control: 10c5387d Table: 8d830019 DAC: 00000015
    Process ifconfig (pid: 1573, stack limit = 0xcd9e42e8)
    Stack: (0xcd9e5dc8 to 0xcd9e6000)
    5dc0: bf0aed94 00000064 00000000 c004ad68 bf0aed94 bf008b00
    5de0: 00000001 00000000 00000000 bf00cda8 00002000 cfbccf10 00008914 c02da710
    5e00: cfbb4fa4 cfbb4c54 cfbccf10 cfbccf0c cfbccec8 cfbb51f8 00000000 cfbcc22c
    5e20: 00000006 cfbcc214 00000000 00000001 00000000 cd8a0400 00008914 bf081e1c
    5e40: cfbc9c8c bf009580 cfbcce14 cd8a0400 00001043 00001002 cfbc9c8c bf00d90c
    5e60: cfbc9c8c 00000000 cfbc9180 bf008648 cd8a0400 bf090ff8 00001043 c02cb6b8
    5e80: cd8a0400 00000041 00001043 c02cac10 00000000 cd8b2f00 cfbc9c80 cd9e5ec0
    5ea0: cfbc9c8c c03070b8 cd8a0400 bebb4b98 6c776974 00306e61 00000000 00000000
    5ec0: 00001043 010e010a bebb4ec3 0009c3bd 00001043 010e010a bebb4ec3 0009c3bd
    5ee0: 00001002 cd872dc0 00008914 bebb4b98 cd872dc0 bebb4b98 cd9e4000 00000000
    5f00: 00000000 c02bafb8 cd872dc0 bebb4b98 00008914 c00bd88c 00000003 cd872dc0
    5f20: 00000003 c00bdfc0 000ad000 000000ad 00000021 000ce000 00000000 c00a4980
    5f40: 00100077 00000000 00000000 000000ad 00000000 c00c0e6c 0000004b cd9c9f00
    5f60: cd9c9f04 cd9c9ee8 00000003 bebb4b98 00008914 cd872dc0 c00360a8 cd9e4000
    5f80: 00000000 c00be038 00000003 00000000 bebb4b98 0008bb60 bebb4b98 000001c3
    5fa0: 00000036 c0035f00 0008bb60 bebb4b98 00000003 00008914 bebb4b98 0008bb60
    5fc0: 0008bb60 bebb4b98 000001c3 00000036 0008bb0c 0008bc90 00001043 00000000
    5fe0: bebb4dd0 bebb4b70 000116dc 4018faec 60000010 00000003 00000000 00110000
    [<c028a4dc>] (omap_hsmmc_status_notify_cb+0x7c/0x108) from [<c004ad68>] (omap_am3517evm_wifi_set_carddetect+0x20/0x44)
    [<c004ad68>] (omap_am3517evm_wifi_set_carddetect+0x20/0x44) from [<bf008b00>] (unplug_device+0x40/0xb8 [tiwlan_drv])
    [<bf008b00>] (unplug_device+0x40/0xb8 [tiwlan_drv]) from [<bf00cda8>] (drvMain_SmEvent+0x1c8/0xa18 [tiwlan_drv])
    [<bf00cda8>] (drvMain_SmEvent+0x1c8/0xa18 [tiwlan_drv]) from [<bf081e1c>] (context_DriverTask+0x98/0x100 [tiwlan_drv])
    [<bf081e1c>] (context_DriverTask+0x98/0x100 [tiwlan_drv]) from [<bf00d90c>] (drvMain_InsertAction+0x7c/0x114 [tiwlan_drv])
    [<bf00d90c>] (drvMain_InsertAction+0x7c/0x114 [tiwlan_drv]) from [<bf008648>] (wlanDrvIf_Start+0x30/0x74 [tiwlan_drv])
    [<bf008648>] (wlanDrvIf_Start+0x30/0x74 [tiwlan_drv]) from [<c02cb6b8>] (dev_open+0xb0/0x10c)
    [<c02cb6b8>] (dev_open+0xb0/0x10c) from [<c02cac10>] (dev_change_flags+0x90/0x160)
    [<c02cac10>] (dev_change_flags+0x90/0x160) from [<c03070b8>] (devinet_ioctl+0x2d4/0x658)
    [<c03070b8>] (devinet_ioctl+0x2d4/0x658) from [<c02bafb8>] (sock_ioctl+0x1f8/0x248)
    [<c02bafb8>] (sock_ioctl+0x1f8/0x248) from [<c00bd88c>] (vfs_ioctl+0x2c/0x70)
    [<c00bd88c>] (vfs_ioctl+0x2c/0x70) from [<c00bdfc0>] (do_vfs_ioctl+0x518/0x55c)
    [<c00bdfc0>] (do_vfs_ioctl+0x518/0x55c) from [<c00be038>] (sys_ioctl+0x34/0x54)
    [<c00be038>] (sys_ioctl+0x34/0x54) from [<c0035f00>] (ret_fast_syscall+0x0/0x2c)
    Code: e5934000 ebf77078 e596203c e1a01005 (e592312c)
    ---[ end trace 11e40e440adbe455 ]---
    TIWLAN: 3705.585295: ***** recovery trigger: BUS_FAILURE *****, ts=1356620283
    TIWLAN: 3705.592436: .....drvMain_Recovery, ts=1356620290
    Segmentation fault
    ##
    ## Configure wlan using the following command:
    ./wlan_cu -i/var/run/tiwlan0
    ##
    ##
    richard.laborde@logicpd.com
    Basic Member
    Basic Member
    Posts:247


    --
    07 Oct 2010 08:22 AM
    Nathan,

    If you have registered your kit you can review the WiFi getting started guide: http://support.logicpd.co...ng_Started_Guide.pdf

    All of the files referenced are available in the AM3517 downloads.
    Nathan.kuo
    New Member
    New Member
    Posts:


    --
    10 Oct 2010 07:53 PM
    Posted By richardl on 7 Oct 2010 8:22 AM
    Nathan,

    If you have registered your kit you can review the WiFi getting started guide: http://support.logicpd.co...ng_Started_Guide.pdf

    All of the files referenced are available in the AM3517 downloads.





    HI

    I rafer to the 1016614A_AM3517_EVM_WiLink_6-0_Getting_Started_Guide.pdf to set up my environment but the same error to enable wifi and bluetooth ,Another i download the AM3517_Linux_WiLink6-0_1-0-0_Demo but the same results.
    I want to use MMC2 interface , but can't work for sdcard and sdio.
    Please provide me the solution I want to use MMC2 and wifi module on the SOM
    Thank you


    ---