|
|
|
|
|
1 Replies and 416 Views
am3517 watchdog doesn't reset 416 1
Started by Anthony Jackson
Has anyone been able to successfully get the hw watchdog working on the board I set up the watchdog (in uboot), watched it count up to the overflow value and it halts the processor, but does not warm reset like I would expect.
If I read the TRM correctly, this is a hardware line that should warm reset the power. All of the logic for doing this is in the am3517 chip, so I don&39;t see a lot of information for how to debug this. Is there something that I have to change in the PCRM
|
|
|
|
1 |
416 |
by Adam Ford 03 Feb 2021 07:31 AM |
|
0 Replies and 355 Views
am3517 watchdog doesn't reset 355 0
Started by Anthony Jackson
Has anyone been able to successfully get the hw watchdog working on the board I set up the watchdog (in uboot), watched it count up to the overflow value and it halts the processor, but does not warm reset like I would expect.
If I read the TRM correctly, this is a hardware line that should warm reset the power. All of the logic for doing this is in the am3517 chip, so I don&39;t see a lot of information for how to debug this. Is there something that I have to change in the PCRM
|
|
|
|
0 |
355 |
02 Feb 2021 05:01 PM |
|
0 Replies and 1295 Views
C11 supported gcc compiler for AM3517 1295 0
Started by Biju_123
Hi, we use SOMAM3517 module integrated into one of the boards of our product.
I need to write an application to run on linux in this SOM, but couldnt find out how to get a gcc with C11 support.
Can anyone help find out how to obtain this
Is it possible to cross compile a newer version of gcc for AM3517
Thank you for any help.
Biju
|
|
|
|
0 |
1295 |
09 Oct 2018 03:36 PM |
|
0 Replies and 1677 Views
Document Update: AM3517 SOM-M2 Product Change Notification 1677 0
Started by Joe Charboneau
The AM3517 SOM-M2 Product Change Notification document has been updated with the addition of PCN 619: "Hardware Changes". This PCN describes a DDR memory supplier change from Winbond to Micron due to the obsolescence of the Winbond part.
You can download this document from the AM3517 SOM-M2 product page on Logic PD&39;s support site.
|
|
|
|
0 |
1677 |
16 May 2017 09:17 AM |
|
0 Replies and 1800 Views
Document Update: Zoom AM3517 eXperimenter Kit Product Change Notification 1800 0
Started by Joe Charboneau
The Zoom AM3517 eXperimenter Kit Product Change Notification document has been updated with the addition of PCN 618: 'Changes to SDK-AM3517-10-256512R-C'. This PCN describes a change to the eXperimenter kit baseboard assembly component population that removes the S-Video connector.
You can download this document from the AM3517 SOM-M2 (eXperimenter Kit) product page on Logic PD's support site.
|
|
|
|
0 |
1800 |
10 Jan 2017 02:14 PM |
|
5 Replies and 3470 Views
Updates for eXperimenter board design files 3470 5
Started by anthony.zuliani@metrixvibration.com
In the 'Hardware Design Files' section of the AM3517 SOM-M2 (eXperimenter Kit) Downloads page, the latest set of AM3517 eXperimenter Kit Hardware Design Files (from 12/12/2011) contains a schematic for board 1014699 rev A.
Are there hardware design files for board 1014698 rev A and B The eXperimenter board I've been using for the past 5 years is 1014698 rev A, with an assembly part number of 1015188 rev B on the front. We purchased another eXperimenter kit earlier this year, and the board insi...
|
|
|
|
5 |
3470 |
by anthony.zuliani@metrixvibration.com 02 Dec 2015 04:37 PM |
|
1 Replies and 2129 Views
AM3517 with 1GB 2129 1
Started by Steve P.
Currently, we purchase your SOMAM3517-10-1780FJIR with 512MB of DDR2 memory. Can this SOM be upgraded to 1 GB of DDR2 memory.
|
|
|
|
1 |
2129 |
by Joe Charboneau 06 Jul 2015 01:12 PM |
|
3 Replies and 2633 Views
WiLink patches 2633 3
Started by Richard MacGregor
Hi,
I have a TI 3517 eXperimenter Kit (along with an Application Board) and after registering on your website I tried accessing the WiLink patches mentioned here:
http://support.logicpd.com/ProductD...rKit).aspx
Unfortunately, the link is not available – I would like to get access to the demo image and the patches themselves so I can make WiFi work on my board. Could you please look into my request
Regards,
Richard
|
|
|
|
3 |
2633 |
by Adam Ford 05 Feb 2015 12:28 PM |
|
0 Replies and 2692 Views
Documentation Updates for AM3517 SOM-M2 2692 0
Started by Deleted User
Released: AM3517 SOM-M2 Hardware Design Files
The BOM, Assembly Drawing, Layout, and Schematic files for the standard AM3517 SOM-M2 configurations have been updated to reflect the latest PCN.
You can download these ZIP files from the AM3517 SOM-M2 (eXperimenter Kit) product page on Logic PD's support site. Under the 'Hardware Design Files' heading, locate the model number of the standard SOM configuration you are using in production and click on the title to download the most current hardw...
|
|
|
|
0 |
2692 |
28 Feb 2014 09:36 AM |
|
0 Replies and 2524 Views
Documentation Updates for AM3517 SOM-M2 2524 0
Started by Deleted User
AM3517 SOM-M2 PCN: Document Update
Revision J of the AM3517 SOM-M2 PCN has been released for 'PCN 592: Hardware Changes.' This PCN explains an upgrade to the DDR SDRAM memory component on the AM3517 SOM-M2. Please see the document's Revision History table for a more detailed explanation of all changes.
You can download this document from the AM3517 SOM-M2 (eXperimenter) product page on Logic PD's support site or at:
http://support.logicpd.com/DesktopM...ntryId=940
|
|
|
|
0 |
2524 |
20 Feb 2014 04:02 PM |
|
0 Replies and 2743 Views
Documentation Updates for AM3517 SOM-M2 2743 0
Started by Deleted User
AM35x SOM-M2 Hardware Specification: Document Update
Rev D of the AM35x SOM-M2 Hardware Specification has been released. This revision updates the mechanical drawings for both the wireless and non-wireless versions of the SOM. Please see the document's Revision History table for a more detailed explanation of all changes.
You can download this document from the AM3517 SOM-M2 (eXperimenter Kit) product page on Logic PD's support site or at:
http://support.logicpd.com/DesktopM...ntryId=938
|
|
|
|
0 |
2743 |
15 Nov 2013 09:20 AM |
|
0 Replies and 2530 Views
Documentation Updates for AM3517 SOM-M2 2530 0
Started by Deleted User
AN 539 AM3517 SOM-M2 Programming for End-Product Manufacturing: Document Update
Revision B of the AM3517 SOM-M2 Programming for End-Product Manufacturing application note has been released. This revision updates the document for version 05-05-00-00 of the AM3517 Linux SDK. Please see the document's Revision History table for a more detailed explanation of all changes.
You can download this document from the AM3517 SOM-M2 (eXperimenter Kit) product page on Logic PD's support site or at:
http:/...
|
|
|
|
0 |
2530 |
08 Nov 2013 08:06 AM |
|
0 Replies and 2525 Views
Documentation Updates for AM3517 SOM-M2 2525 0
Started by Deleted User
AM3517 Linux User Guide: Document Update
Revision C of the AM3517 Linux User Guide has been released. This revision updates the instructions throughout the document for AM3517 SOM-M2s with 4-bit ECC NAND. It also explains how to apply the recently released Linux source patch that is necessary to build Linux with 4-bit ECC NAND SOMs. Please see the document's Revision History table for a more detailed explanation of all changes.
You can download this document from the AM3517 SOM-M2 (eXperim...
|
|
|
|
0 |
2525 |
25 Oct 2013 10:53 AM |
|
0 Replies and 2320 Views
Documentation Updates for AM3517 SOM-M2 2320 0
Started by Deleted User
AN 506 AM3517 SOM-M2 Blank SOM Programming: Document Update
Revision D of the AM3517 SOM-M2 Blank SOM Programming application note has been released. This revision updates the instructions throughout the document for SOMs with 4-bit ECC NAND. Please see the document's Revision History table for a more detailed explanation of all changes.
You can download this document from the AM3517 SOM-M2 (eXperimenter Kit) product page on Logic PD's support site or at:
http://support.logicpd.com/DesktopM...
|
|
|
|
0 |
2320 |
20 Sep 2013 09:44 AM |
|
0 Replies and 2296 Views
Documentation Updates for AM3517 SOM-M2 2296 0
Started by Deleted User
AN 582 Introduction to Direct Hardware Access with Linux Device Drivers: New Document
Revision A of the Introduction to Direct Hardware Access with Linux Device Drivers application note has been released. This document provides instructions about how to create and use a basic Linux device driver, and explains how the device driver interacts with the Linux operating system.
You can download this document from the AM3517 SOM-M2 (eXperimenter Kit) product page on Logic PD's support site or at:
...
|
|
|
|
0 |
2296 |
04 Sep 2013 12:36 PM |
|
0 Replies and 2112 Views
OpenGL ES enablement 2112 0
Started by brian.edmond
I have a kit and when I boot there is no OpenGL ES library. I saw there was a link to the TI BSP which seems to include the OpenGL ES libraries. I followed the steps to flash the board but once completed the board boots but gets many errors on the flash regarding a magic number mismatch for the filesystem. Has anyone re-flashed the board and gotten OpenGL ES to work
Thanks,
Brian
|
|
|
|
0 |
2112 |
20 Aug 2012 06:15 PM |
|
0 Replies and 2107 Views
Programming with JTAG 2107 0
Started by Nived
Hi,
I am trying to program the experimenter kit with JTAG/OpenOCD. I find that when i load code on to the external SRAM it seems to be successful, but when i inspect the memory region i find that nothing has been written. Any ideas
Thanks
Nived
|
|
|
|
0 |
2107 |
02 Mar 2012 09:34 AM |
|
2 Replies and 6631 Views
Greeh Hills Integrity and Probe 6631 2
Started by Jonno
Hi,
I'm new to both Green Hills tools and this dev kit. There's a BSP from Green Hills for the OMAP35x-LogicPD, which I assumed should work on this dev board. Everything compiles but I can't attach the GHS JTAG probe without error (tried both USB and Ethernet connection to the probe).
When I try to connect I get the following messages. Any ideas
Script O:\OS\INTEGRITY\int1002\omap35x-logicpd\omap35x-logicpd.mbs:7
Failed executing setup script!
load: Download failed.
Green Hills Probe erro...
|
|
|
|
2 |
6631 |
by Jonno 05 Oct 2011 04:47 PM |
|
0 Replies and 2106 Views
User DIP switches and LED access under Linux? 2106 0
Started by ymcdonald
Hello,
I'm using the eXperimenter board as a target device for an embedded medical device. I want to use the main board DIP switch bank an the two user LED for application testing purposes.
I can see that there is an I2C character device driver for them (/dev/i2c-2/) but I have no clue about using it. Trying to read from the device (cat /dev/i2c-2) returns a remote i/o error.
Are there any instructions on how to use that device Official documentation does not say much about them.
Thanks,
...
|
|
|
|
0 |
2106 |
24 Aug 2011 10:32 AM |
|
0 Replies and 2070 Views
Serial Port, GPIO, USB, I2C, LAN 2070 0
Started by razn2
Hello All,
For my application I want to use the CPU board in eXperimenter and connect it to my customized baseboard which has 4 serial ports, 10 GPIO, I2C, spi port, 1 USB and 1 Ethernet port. I Do need to be able to read/write to these interfaces. As I see the eXperimenter CPU board doesn't have the required drivers.
Could somebody help me out how to prepare the Kernel and drivers to be able to work with these interfaces.
Thanks for your Comments
|
|
|
|
0 |
2070 |
04 Aug 2011 06:06 AM |