|
|
|
|
|
1 |
3307 |
by Adam Ford 04 Sep 2015 08:24 AM |
|
0 Replies and 2393 Views
Zoom AM1808 eXperimenter Kit End of Life Notification: New Document 2393 0
Started by Joe Charboneau
Logic PD is announcing the discontinuance of the Zoom AM1808 eXperimenter Kit.
Important Note: This EOL does not apply to the AM1808 SOM-M1 modules.
You can download this document from the AM1808 SOM-M1 (eXperimenter Kit) Downloads page on Logic PD's support site, or at:
https://support.logicpd.com/Desktop...tryId=2997
|
|
|
|
0 |
2393 |
01 Jun 2015 11:10 AM |
|
5 Replies and 3304 Views
AM1808:SATA 3304 5
Started by Makoto Nagano
Hi everybody
I connected the sata connetor on AM1808 kit to a SSD made by Samsung,
but the SSD don't work .
I want good sample souce code to wirte/read a SSD.
|
|
|
|
5 |
3304 |
by Adam Ford 13 Oct 2014 12:03 PM |
|
0 Replies and 2627 Views
Documentation Updates for AM1808 SOM-M1 2627 0
Started by Deleted User
Updated AM1808 SOM-M1 3-D Model Files have been released. You can download this document from the AM1808 SOM-M1 (EVM) product page on Logic PD's support site or at:
http://support.logicpd.com/DesktopM...tryId=1422
|
|
|
|
0 |
2627 |
16 Sep 2014 10:42 AM |
|
0 Replies and 2565 Views
AN 556 AM1808 & OMAP-L138 SOM-M1 Flash Recovery: Document Updates 2565 0
Started by Deleted User
Revision B of the AN 556 AM1808 & OMAP-L138 SOM-M1 Flash Recovery application note has been released. You can download this document from the AM1808 SOM-M1 and eXperimenter Kit product page on Logic PD's support site or at: http://support.logicpd.com/ProductD...rKit).aspx
|
|
|
|
0 |
2565 |
10 Sep 2014 09:45 AM |
|
0 Replies and 2688 Views
Documentation Updates for AM1808 SOM-M1 2688 0
Started by Deleted User
Released: AM1808 SOM-M1 Hardware Design Files
The BOM, Assembly Drawing, Layout, and Schematic files for the standard AM1808 SOM-M1 configurations have been updated to reflect the latest PCN.
You can download these ZIP files from the AM1808 SOM-M1 (eXperimenter Kit) product page on Logic PD's support site. Under the 'Hardware Design Files' heading, locate the model number of the standard SOM configuration you are using in production and click on the title to download the most current hardw...
|
|
|
|
0 |
2688 |
06 Jun 2014 10:24 AM |
|
0 Replies and 2778 Views
IMPORTANT NOTICE: AM1808 SOM-M1 Errata & PCN Update 2778 0
Started by Deleted User
AM1808 SOM-M1 Errata: Document Update
The AM1808 SOM-M1 Errata document has been updated for Errata ID E0053 that explains an issue related to the ESD sensitivity of the AM1808 processor clock. Both Errata ID E0046 and Errata ID E0053 were also marked as fixed. Please see the AM1808 SOM-M1 Errata document for additional details regarding these issues.
You can download this document from the AM1808 SOM-M1 (eXperimenter Kit) product page on Logic PD's support site or at:
http://support.logicp...
|
|
|
|
0 |
2778 |
03 Jun 2014 10:40 AM |
|
1 Replies and 3167 Views
Having trouble in finding hardware information 3167 1
Started by Deleted User
hi,
I need some information about Hardware, i don't know what components are connected to I2c at what address ,i was expecting from this
cat /sys/bus/i2c/devices/i2c-1/new_device
but i gives me this
cat: can't open '/sys/bus/i2c/devices/i2c-1/new_device': Permission denied
i have tried to search out addresses from am1808`s datasheet, but unable to find it yet
one way i know that by using i2cdetect, but i would like to know which Document have such information which fu...
|
|
|
|
1 |
3167 |
by bradb 29 Apr 2014 01:50 PM |
|
1 Replies and 3419 Views
Black Hawk usn100v2 not working 3419 1
Started by Deleted User
I purchased AM1808 experimenters kit. When I tried to run led dip test provided with the bsl library, I am getting the error
Error connecting to the target:
Error 0x80002240/-154
Fatal Error during: Initialization, OCS, Control,
But I was able to run the same without using the on board xds100.
Black hawk is listed properly in device manager.
How can I resolve this issue.
|
|
|
|
1 |
3419 |
by Deleted User 06 Mar 2014 03:01 AM |
|
0 Replies and 2653 Views
Documentation Updates for AM1808 SOM-M1 2653 0
Started by Deleted User
AM1808 & OMAP-L138 SOM-M1 U-Boot Software & Labs: Document Update
Revision C of the AM1808 & OMAP-L138 SOM-M1 U-Boot Software & Labs download has been released. This revision includes information about how to set both the MAC address and the netmask when establishing a network connection. Please see the document's Revision History table for a more detailed explanation of all changes.
You can download this document from the AM1808 SOM-M1 (eXperimenter Kit) product page on Lo...
|
|
|
|
0 |
2653 |
28 Feb 2014 08:38 AM |
|
2 Replies and 3273 Views
AM1808 SOM M1 UBL and U-BOOT source 3273 2
Started by Deleted User
Hi,
I bought AM1808 eXperimenter kit from Logic PD. The plan was to use this EVM as referenced one for my custom design. I made some tests with kit I bought and everything goes fine. Except AM1808, in my custom design I decide to use AM1806 TI Sitara processor. I don't need SPI and Ethernet Interface. Now my hardware is assembled and it is the time to boot UBL and U-BOOT. Because all components on custom board are the same as the components on AM1808 SOM M1 module (instead of UART debug port, I...
|
|
|
|
2 |
3273 |
by Deleted User 14 Feb 2014 05:35 AM |
|
0 Replies and 2198 Views
Documentation Updates for AM1808 SOM-M1 2198 0
Started by Deleted User
AM1808 SOM-M1 Hardware Specification: Document Update
Revision D of the AM1808 SOM-M1 Hardware Specification has been released. This revision adds pick and place machine recommendations. Please see the document's Revision History table for a more detailed explanation of all changes.
You can download this document from the AM1808 SOM-M1 (eXperimenter Kit) product page on Logic PD's support site or at:
http://support.logicpd.com/DesktopM...ntryId=786
|
|
|
|
0 |
2198 |
22 Nov 2013 12:22 PM |
|
0 Replies and 2161 Views
Documentation Updates for AM1808 SOM-M1 2161 0
Started by Deleted User
AN 477 AM1808 SOM-M1 Design Checklist: Document Update
Revision D of the AM1808 SOM-M1 Design Checklist application note has been released. This revision corrects several signal names in Table 2.1 and updates a link to SMSC's AN 8.13. Please see the document's Revision History table for a more detailed explanation of all changes.
You can download this document from the AM1808 SOM-M1 product page on Logic PD's support site or at:
http://support.logicpd.com/DesktopM...ntryId=775
|
|
|
|
0 |
2161 |
25 Oct 2013 09:53 AM |
|
1 Replies and 3386 Views
MMCSD example fails test 3386 1
Started by Deleted User
Hi,
When we build and run "AM1808eXp MMCSD Test" BSL example code with SD card provided with the kit, the code hangs after printing the following:
--- identify card ---
On debugging with breakpoints, we found out that the code gets stuck inside sendCmd() function in following while loop.
if (check_status)
{
while (1)
{
stat_reg = mmcsd->MMCST0;
stat1_reg = mmcsd->MMCST1;
if (CHKBIT(stat_reg, RSPDNE))
{
rtn = ER...
|
|
|
|
1 |
3386 |
by Deleted User 21 Mar 2012 02:02 AM |
|
0 Replies and 2294 Views
AM1808 silicon 2.0 does not boot with 2.6.33 Linux kernel 2294 0
Started by Deleted User
The AM1808/OMAP-L138 silicon of revision 2.0 does not boot with the Linux kernel code, why not
A: The new revision boards were getting stuck in setup_arch() when the CPU ID is determined. There were accommodations in 2.6.33 for silicon revisions up to 1.1 but not for 2.0 as there are in 2.6.37. To account for this, Below is a patch for the following change:
In kernel linux-2.6.33/arch/arm/mach-davinci/da850.c, add a definition to da850_id list which is needed for OMAP-L138 silicon revision ...
|
|
|
|
0 |
2294 |
24 Jun 2011 02:37 PM |
|
2 Replies and 3294 Views
Demo Doesn't Work 3294 2
Started by GLoucks
The demo on the SD doesn't work for me. I get the penguin boot, but it never goes past. I hooked up the serial port, this is what I get:
Booting with TI UBL
Device OPP (300MHz, 1.2V)
U-Boot 2009.11 (Mar 25 2010 - 14:39:42)
I2C: ready
DRAM: 64 MB
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
ARM Clock : 300000000 Hz
DDR Clock : 132000000 Hz
Net: Ethernet PHY: GENERIC 0x00
Hit any key to stop autoboot: 0
8192 KiB M25P64 at 0:0 is now curre...
|
|
|
|
2 |
3294 |
by GLoucks 27 May 2011 09:13 AM |
|
5 Replies and 2999 Views
AM1808: Rx-Problem with 'evmam1808_emac.c' from BSL V1.0 2999 5
Started by tuberkulum
Hello,
while adapting and testing our software with the 'AM1808 eXperimenter Kit', we experience some problems with Ethernet-reception, which we do not understand. Could you please take a look to the details below.
Thank you very much!
Ralf
====================================================
PROBLEM-BRIEF
---------------
The BSL-EMAC-LowLevel Driver 'evmam1808_emac.c' (taken from BSL V1.0) delivers
about 80 invalid frames.
PROBLEM-DETAILS
------------------
To be compatible to our custome...
|
|
|
|
5 |
2999 |
by tuberkulum 28 Sep 2010 02:28 AM |
|
0 Replies and 2251 Views
AM1808: Rx-Problem with 'evmam1808_emac.c' from BSL V1.0 2251 0
Started by tuberkulum
Hello,
while adapting and testing our software with the 'AM1808 eXperimenter Kit', we experience some problems with Ethernet-reception, which we do not understand. Could you please take a look to the details below.
Thank you very much!
Ralf
====================================================
PROBLEM-BRIEF
---------------
The BSL-EMAC-LowLevel Driver 'evmam1808_emac.c' (taken from BSL V1.0) delivers
about 80 invalid frames.
PROBLEM-DETAILS
------------------
To be compatible to our custome...
|
|
|
|
0 |
2251 |
31 Aug 2010 01:26 AM |