DM37x Windows Embedded CE 6.0 BSP Release Notes ------------------------------------------------------------------------------- Logic PD Version: 3.0.2 Hardware: DM3730/AM3703 SOM-LV & DM3730/AM3703 Torpedo SOM Date: 7/17/2013 ------------------------------------------------------------------------------- --------------------------- Table of Contents --------------------------- 0 Scope of Document 1 Package Contents 2 Supported Drivers and Features 3 Tested Platforms 4 Bootloader 5 Known Issues 6 How To 7 History 8 Revision Information --------------------------- 0) Scope of Document -------------------- This document contains information pertaining to the use of Logic PD's Windows Embedded CE 6.0 BSP on the DM3730/AM3703 SOM-LV and DM3730/AM3703 Torpedo SOM platforms. It provides information on the contents of the enclosed .zip file. For instructions about how to install and use this package, please see the "DM37x Windows Embedded CE 6.0 BSP User Guide," available on the Logic PD website at: http://support.logicpd.com/downloads/1423/ IMPORTANT NOTE: Windows CE software is not supported for use on the DM3730/AM3703 Torpedo + Wireless SOM. 1) Package Contents ------------------- This release contains the following folders and files: --) \Binaries This folder contains pre-built OS images based on OS Designs also included with this package. The differences are listed below. Each image references the applicable model numbers, as well as a .pbxml file, associated with the selected catalog items. Please refer to the model number of your own device to determine the applicable image. - LOGIC_SOM_ARM_A8\LOGIC_SOM_ARM_A8\NK-SOMLV_10A_256MB-RAM.bin RAM-based registry storage release build of LOGIC_ARM_A8_SOM_LV_DM_10A OS Design. Contains all of the bells and whistles, including multimedia support and Internet Explorer. A very large image; most components are included. For application development, connect the Visual Studio tools using ActiveSync over USB Function (OTG) or an active Ethernet connection. Contains most application support components. Reference .pbxml file: LOGIC_ARM_A8_SOM_LV_DM_10A.pbxml. This image applies to the following model numbers: SOMDM3730-10-2782IFCR SOMDM3730-10-1782IFXR - LOGIC_SOM_ARM_A8\LOGIC_SOM_ARM_A8\NK-SOMLV_10A_HIVE_LCD_256MB-RAM.bin Hive-based registry storage release build of LOGIC_ARM_A8_SOM_LV_DM_10A_HIVE_LCD OS Design. Contains all of the bells and whistles, including multimedia support and Internet Explorer. A very large image; most components are included. For application development, connect the Visual Studio tools using ActiveSync over USB Function (OTG) or an active Ethernet connection. Contains most application support components. Reference .pbxml file: LOGIC_ARM_A8_SOM_LV_DM_10A_HIVE_LCD.pbxml. This image applies to the following model numbers: SOMDM3730-10-2782IFCR SOMDM3730-10-1782IFXR - LOGIC_SOM_ARM_A8\LOGIC_SOM_ARM_A8\NK-SOMLV_10A_HIVE_DVI_256MB-RAM.bin Hive-based registry storage release build of LOGIC_ARM_A8_SOM_LV_DM_10A_HIVE_DVI OS Design. Contains all of the bells and whistles, including multimedia support and Internet Explorer. A very large image; most components are included. For application development, connect the Visual Studio tools using ActiveSync over USB Function (OTG) or an active Ethernet connection. Contains most application support components. Reference .pbxml file: LOGIC_ARM_A8_SOM_LV_DM_10A_HIVE_LCD.pbxml. This image applies to the following model numbers: SOMDM3730-10-2782IFCR SOMDM3730-10-1782IFXR - LOGIC_SOM_ARM_A8\LOGIC_SOM_ARM_A8\NK-TORPEDO_10A_256MB-RAM.bin RAM-based registry storage release build of LOGIC_ARM_A8_TORPEDO_DM_10A OS Design. Contains all of the bells and whistles, including multimedia support and Internet Explorer. A very large image; most components are included. For application development, connect the Visual Studio tools using ActiveSync over USB Function (OTG) or an active Ethernet connection. Contains most application support components. Reference .pbxml file: LOGIC_ARM_A8_TORPEDO_DM_10A.pbxml. This image applies to the following model numbers: SOMDM3730-20-1780AGIR SOMDM3730-20-2780AGCR SOMAM3703-20-1780AGCR - LOGIC_SOM_ARM_A8\LOGIC_SOM_ARM_A8\ NK-TORPEDO_10A_HIVE_LCD_256MB-RAM.bin Hive-based registry storage release build of LOGIC_ARM_A8_TORPEDO_DM_10A_HIVE_LCD OS Design. Contains all of the bells and whistles, including multimedia support and Internet Explorer. A very large image; most components are included. For application development, connect the Visual Studio tools using ActiveSync over USB Function (OTG) or an active Ethernet connection. Contains most application support components. Reference .pbxml file: LOGIC_ARM_A8_TORPEDO_DM_10A_HIVE_LCD.pbxml. This image applies to the following model numbers: SOMDM3730-20-1780AGIR SOMDM3730-20-2780AGCR SOMAM3703-20-1780AGCR - LOGIC_SOM_ARM_A8\LOGIC_SOM_ARM_A8\ NK-TORPEDO_10A_HIVE_LCD_512MB-RAM.bin Hive-based registry storage release build of LOGIC_ARM_A8_TORPEDO_DM_10A_HIVE_LCD OS Design. Contains all of the bells and whistles, including multimedia support and Internet Explorer. A very large image; most components are included. Supports 512 MB RAM (352MB User accessible). For application development, connect the Visual Studio tools using ActiveSync over USB Function (OTG) or an active Ethernet connection. Contains most application support components. Reference .pbxml file: LOGIC_ARM_A8_TORPEDO_DM_10A_HIVE_LCD.pbxml. This image applies to the following model numbers: SOMDM3730-20-1880AGIR - LOGIC_SOM_ARM_A8\LOGIC_SOM_ARM_A8\NK-TORPEDO_10A_HIVE_DVI_256MB-RAM.bin Hive-based registry storage release build of LOGIC_ARM_A8_TORPEDO_DM_10A_HIVE_DVI OS Design. Contains all of the bells and whistles, including multimedia support and Internet Explorer. A very large image; most components are included. For application development, connect the Visual Studio tools using ActiveSync over USB Function (OTG) or an active Ethernet connection. Contains most application support components. Reference .pbxml file: LOGIC_ARM_A8_TORPEDO_DM_10A_HIVE_DVI.pbxml. This image applies to the following model numbers: SOMDM3730-20-1780AGIR SOMDM3730-20-2780AGCR SOMAM3703-20-1780AGCR - LOGIC_SOM_ARM_A8\LOGIC_SOM_ARM_A8\NK-TORPEDO_10A_512MB-RAM.bin RAM-based registry storage release build of LOGIC_ARM_A8_TORPEDO_DM_10A OS Design. Contains all of the bells and whistles, including multimedia support and Internet Explorer. A very large image; most components are included. Supports 512 MB RAM (352MB User accessible). For application development, connect the Visual Studio tools using ActiveSync over USB Function (OTG) or an active Ethernet connection. Contains most application support components. Reference .pbxml file: LOGIC_ARM_A8_TORPEDO_DM_10A.pbxml. This image applies to the following model numbers: SOMDM3730-20-1880AGIR - LOGIC_SOM_ARM_A8\LOGIC_SOM_ARM_A8\NK-TORPEDO_10A_VRFB_256MB-RAM.bin RAM-based registry storage release build of LOGIC_ARM_A8_TORPEDO_DM_10A OS Design. Contains all of the bells and whistles, including multimedia support and Internet Explorer. A very large image; most components are included. Include VRFB support with display rotated 90 degrees. For application development, connect the Visual Studio tools using ActiveSync over USB Function (OTG) or an active Ethernet connection. Contains most application support components. Reference .pbxml file: LOGIC_ARM_A8_TORPEDO_DM_10A.pbxml. This image applies to the following model numbers: SOMDM3730-20-1780AGIR SOMDM3730-20-2780AGCR SOMAM3703-20-1780AGCR - LogicLoader_Scripts/ Contains example scripts for loading and launching the NK.bin files. + load_from_nand_script.txt Mounts YAFFS partition and loads NK.bin from YAFFS. + load_from_sd_script.txt Mounts SD card and loads NK.bin from SD. + LoLo_bootme_192.168.0.154_NET Sets up static IP address, sends bootme packet to Platform Builder/VS2005, and loads NK.bin from Platform Builder. + LoLo_bootme_dhcp_NET Sets up DHCP address, sends bootme packet to Platform Builder/VS2005, and loads NK.bin from Platform Builder. + WinCE_Launch_after_ram_load_boot_script.losh Command to launch OS after NK.bin is loaded (assumes default 4.3" display is used). + WinCE_Launch_LCD-x.x-xxxx-xx_ram_boot_script.losh Command to launch OS after NK.bin is loaded, and sets up specific display kit before launching into OS. --) \Documentation This folder contains documents describing the operation and use of the driver components built into the OS Design. --) \OSDesigns - LOGIC_ARM_A8_SOM_LV_DM_10A This OSDesign is for the SOM-LV RAM-based registry. It contains most of the drivers, including multimedia and Internet Explorer, plus all application support. - LOGIC_ARM_A8_SOM_LV_DM_10A_HIVE_LCD This OSDesign is for the SOM-LV Hive-based registry, LCD display. It contains most of the drivers, including multimedia and Internet Explorer, plus all application support. - LOGIC_ARM_A8_SOM_LV_DM_10A_HIVE_DVI This OSDesign is for the SOM-LV Hive-based registry, DVI display. It contains most of the drivers, including multimedia and Internet Explorer, plus all application support. - LOGIC_ARM_A8_TORPEDO_DM_10A This OSDesign is for the Torpedo RAM-based registry. It contains most of the drivers, including multimedia and Internet Explorer, plus all application support. - LOGIC_ARM_A8_TORPEDO_DM_10A_HIVE_LCD This OSDesign is for the Torpedo Hive-based registry, LCD display. It contains most of the drivers, including multimedia and Internet Explorer, plus all application support. - LOGIC_ARM_A8_TORPEDO_DM_10A_HIVE_DVI This OSDesign is for the Torpedo Hive-based registry, DVI display. It contains most of the drivers, including multimedia and Internet Explorer, plus all application support. --) \PLATFORM This folder contains the DM3730/AM3703 SOM-LV and DM3730/AM3703 Torpedo SOM platform-specific port of the Windows CE 6.0 operating system. The BSP can be built for either platform, based on a catalog component choice. There are very few differences in the hardware design and these small differences are handled in software by the building process. 2) Supported Drivers and Features --------------------------------- --) Basic kernel functionality - Interrupts, 1 ms system timer - Shared access to TWL chip, I2C interface, and GPIO - Performance counter supported - TWL Root Driver - OEMIdle / Suspend support - RTC --) Audio Driver - Supports audio playback through audio jack on the baseboard - Supports audio record through audio jack on baseboard --) YAFFS Driver - Support for YAFFS (Yet Another Flash File System) on the onboard NAND flash. --) Bluetooth Driver --) Backlight Driver --) Root Power Bus Driver --) Power Key Driver --) LED Switch Driver - SOM-LV only --) Display Driver - Supports Logic PD's 4.3" display - Supports the following DVI resolutions: 800x600 60 Hz 800x480 60 Hz 640x480 60 Hz 640x480 72 Hz 800x600 56 Hz 1024x768 60 Hz 1280x720 72 Hz - Supports custom display initialization in LogicLoader (auto detects settings) - NOTE: DVI displays 40, 42, 43, 45, 47 do not work properly if pre-initialized in LogicLoader using HDMI port - NOTE: DVI hive image for Torpedo has trouble booting if not pre-initialized in LogicLoader. Initalize and display a splash screen in LogicLoader before booting Windows. - Supports 2D Hardware Acceleration --) System DMA Driver --) GPIO Driver - Supports GPIO usage from applications and drivers for DM37x and PMIC (TPS65950) GPIO. - API header information can be found in \WINCE600\PLATFORM\COMMON\SRC\SOC\ARM_A8_TPS659XX_TI_V1\inc\gpio.h - Example usage can be found in: \WINCE600\PLATFORM\LOGIC_ARM_A8\SRC\drivers\sdhc\impl\ SDController.cpp --) I2C Driver --) Wi-Fi Driver - Supports WiLink6.0 solution using WL1271 module - Provided in binary format only --) NETUI Driver - Custom NETUI driver with modified dialog boxes to support Logic PD's 4.3" display --) Ethernet Driver - Boot-time and run-time cable detection - 10/100 MB/s full/half duplex modes support - Auto negotiation support - Static IP and DHCP address support - LAN921x and LAN922x chip support --) SDIO Driver - Boot-time and run-time card detection - DMA supported read and write transfers - Write protection support - On-board Wi-Fi chip support --) McBSP Driver --) SPI Driver - Supports SPI1, SPI2, and SPI3 NOTE: SPI2 on DM3730 Torpedo Development Kit requires capacitors C156 and C157 to be de-populated - Supports DMA operation --) UART Driver - Supports 5, 6, 7, 8N1 with standard baud rates up to and including 115200b/s. --) Touch Driver --) USB OTG - DM37x USB0 Port - Function - Can function as an ActiveSync device - Can function as a mass storage device - Host - Supports Human Interface Devices (HID) (e.g., mouse, keyboard) - Supports mass storage devices --) USB Host - ISP176x (post PCN400) - Supports HID devices - Supports three USB Host ports from the SOM-LV and Torpedo baseboards --) YAFFS- and SD-based Hive Registy is supported. YAFFS is the default, as defined in LOGIC_ARM_A8.bat set BSP_HIVE_YAFFS=1 set BSP_HIVE_SDHC= set BSP_HIVE_ATAMEMCF= ---) KITL (Only in Debug Configuration) - Debugging with break points - Remote Tools - Will notify Ethernet driver to not load, preventing conflicts 3) Tested Platforms ------------------- The following hardware has been tested: --) SOM-LV: - Model Number SOMDM3730-10-1782-JFIR-A SOMDM3730-10-1782-IFXR-A SOMDM3730-10-2782-IFCR-A - Part Number 1017377B 1017348D 1017318C - Configuration Description ASSEMBLY, DM3730-10 (ROHS), 256MB DDR, 512MB NAND,8MB NOR, AUDIO, TOUCH, ETHERNET, BLUETOOTH, 802.11 --) SOM-LV Baseboard: - Part Number 1018103A --) Torpedo SOM: - Model Number SOMDM3730-20-2780AGCR-A SOMDM3730-20-1780AGIR-A SOMDM3730-20-1880AGIR-A - Part Number 1017878B 1017193C 1023692A - Configuration Description ASSEMBLY, TORPEDO, DM3730-20 (ROHS), 256MB DDR, 512MB NAND ASSEMBLY, TORPEDO, DM3730-20 (ROHS), 512MB DDR, 512MB NAND --) Torpedo Baseboard: - Part Number 1017984A 4) Bootloader ------------- --) LogicLoader 2.5.3 or higher is required --) Tested with 2.5.3 5) Known Issues --------------- --) The Windows CE operating system supports a maximum physical memory of 512MB. The DM37 processor has 160MB of register space which must be allocated in the same 512MB window. As a result, the 512MB RAM configuration has 352MB of User accessible RAM. --) A pop sound may be heard at the end of an audio file. (Jira # OMAP3WCE600-341) --) Audio out is noisy/static for a few seconds after going to suspend and resume. Make sure audio is stopped before going into suspend. (Jira # DM3730WCE-83) --) KITL Auto Negotiation KITL will fail at connecting to a network that does not support auto negotiation. In current release, auto negotiation must be available for KITL to work. (Jira # OMAP3WCE600-444) --) SDIO multi-block data transfers are limited to 2 blocks/transfer (silicon bug). (Jira # OMAP3WCE600-445) --) SDIO "I/O mode on" does not reliably work. (Jira # OMAP3WCE600-446) --) SDIO Windows CETK test does not complete and results in the device disconnecting. (Jira # OMAP3WCE600-447) --) Debug binary may not return to operation after entering low-power mode. Upon entering low-power mode or being suspended when using the debug binary module, the system may not recover to full operation. The CE screen may or may not return, and if the CE screen does return it may or may not operate normally. This behavior has not been observed on the release binary. (Jira # OMAP3WCE600-448) --) Debug tools and debugging via ActiveSync are not supported. Cause: Windows CE 6.0 has no support for Cortex-A8 ARMv7-A; therefore, it falls back to using ARMv4 instead. However, the built-in Microsoft Platform Builder CE Debug Tools support the ARMv4i architecture only. Workaround: Copy x:\Program Files\Common Files\Microsoft Shared\Windows CE Tools\Platman\ target\wce600\armV4i into x:\Program Files\Common Files\Microsoft Shared\Windows CE Tools\Platman\ target\wce600\armV4 For further information, please refer to the following URL: http://nicolasbesson.blogspot.com/2007/06/remote-tools-arm-processor-and-windows.html --) SPI Test will fail on the first pass on SPI1 interface if Bluetooth is configured in the build. It will pass on the second attempt. If Bluetooth is not configured, the test should pass on the first attempt. (Jira # OMAP3WCE600-449) (see also OMAP3WCE600-154) --) Bluetooth driver will generate DEBUGCHK breaks (2 to 3 times) when using a debug build with kernel debugger. Pressing the F5 key (Debug Menu / 'Start') to continue running will properly boot the device. "Unknown: DEBUGCHK failed in file C:\ymzki\private\winceos\comm\bluetooth\pan\.\miniport.cxx at line 5594" (Jira # OMAP3WCE600-59) --) UFSDIO/SDHC driver may generate DEBUGCHK breaks (~10 times) when using a debug build with kernel debugger. Pressing the F5 key (Debug Menu / 'Start') to continue running may help, a reboot may be required. "Unknown: DEBUGCHK failed in file C:\WINCE600\PLATFORM\LOGIC_SOM_OMAP35x\SRC\drivers\sdhc\ SDBUS2\sddevice.cpp" (Jira # OMAP3WCE600-450) --) USB OTG Host functionality requires adding the following items to the OS build: - USB OTG Function - USB Function - USB Function Client (Jira # OMAP3WCE600-451) --) USB OTG may disconnect from USB Host or USB Devices. (Jira # OMAP3WCE600-91) --) USB mass storage devices connected to the USB Host interface unexpectedly terminate during read transactions. This issue does not exist when connecting a USB mass storage device to the USB OTG interface. (Jira # OMAP3WCE600-452) --) Charge current is set to 1.2A; the limit for the DM3730 Torpedo Development kit is 0.6A (at room temperature less than 30C). To change the charging current, comment the following code from the \WINCE600\PLATFORM\LOGIC_SOM_OMAP35x\SRC\ oal\oallib\oem_pm.c file: // UPDATE MAIN BATTERY CHARGING SETTINGS ON TORPEDO PLATFORM { OALTritonWrite(hTwl, TWL_BOOT_BCI, 0x10); //need to turn off auto-charging OALTritonWrite(hTwl, TWL_BCICTL1, 0x20); //update charging current to 2x OALTritonWrite(hTwl, TWL_BOOT_BCI, 0x11); //turn back on auto-charging // OALTritonWrite(hTwl, TWL_BCIMFKEY, 0xE7); // OALTritonWrite(hTwl, TWL_BCIIREF1, 0xFF); //update charging current // OALTritonWrite(hTwl, TWL_BCIMFKEY, 0xE7); // OALTritonWrite(hTwl, TWL_BCIIREF2, 0x03); //update charging current } (Jira # OMAP3WCE600-39) --) For the DM3730/AM3703 Torpedo SOMs, movie or audio files requiring certain codecs will have a warning message saying the codec is not available. Playback of movies continues with no audio. (Jira # OMAP3WCE600-308) --) When using the 3.6" or 6.4" display, it can be difficult to calibrate with touch as the display touch is out of calibration. The user must attach a mouse to navigate to the calibration application. (Jira # OMAP3WCE600-510) --) Cannot use touch or USB devices when KITL is enabled on the DM3730/AM3703 Torpedo SOM. (Jira # OMAP3WCE600-467) --) Serial Debug messages appear on UARTA. If you disable the serial debug and enable UARTA to be used as a serial standard UART, you still get serial debug messages from UARTA. (Jira # OMAP3WCE600-464) --) CETK Test Failure "RTC_Real-Time_Functions" - December 31st rollover test. This is a Microsoft-related issue due to enabling DST. (Jira # OMAP3WCE600-375) --) USB OTG HOST USB Powered Hub + 2 devices at Run-Time is non-functional. Neither keyboard nor mouse will work well with powered hub. (Jira # OMAP3WCE600-350) --) Included files are not properly added. SDK build does not include necessary header files. (Jira # OMAP3WCE600-471) --) Performance: Poor Object Store File System Performance. The performance of copying a file from \Temp to "\Application Data" is low. (Jira # OMAP3WCE600-511) --) Performance: Poor Object Store File System Performance. The performance of copying a file from \Temp to "\Application Data" is low. (Jira # OMAP3WCE600-511) --) DVFS: OPM0 Is not functional. Core Frequency is not divided. (Jira # DM3730WCE-20) --) Display: Display does not turn off upon System Timeout. Display does not go blank at the end of system idle time out. (Jira # DM3730WCE-19) --) Display: Diplay cannot be resumed by touch input. (Jira # DM3730WCE-12) --) Display: Certain displays do not operate properly if pre-initialized in LogicLoader using HDMI port (Jira # DM3730WCE-84). --) USB: USB UNPowered Hub+KB+Mouse detect at boot and at run-time (DM3730/AM3703 SOM-LV). The mouse may not function after rebooting the board with the unpowered hub with mouse and keyboard. (Jira # DM3730WCE-28) --) USB: Simultaneous USB mouse and keyboard activity (DM3730/AM3703 Torpedo SOM). Simultaneous USB mouse and keyboard activity make both stop working. (Jira # DM3730WCE-48) 6) How To --------- --) How to enable debug messages By default, debug messages get disabled at the end of kernel initialization. The rationale for disabling the debug messages is to avoid conflicts between the debug messages and the user-level UART driver as they use the same physical UART port. In order to enable the debug messages, select the DM37x SOM-LV Debug serial option found in the following catalog path Third Party\BSP\LOGIC_ARM_A8\Device Drivers\Serial\UART\UART1 When the debug serial option is enabled, the use of the COM1 UART driver will not be available. The other serial ports are available when receiving debug messages through the debug serial port. NOTE: The recommended method for debug is using KITL. --) How to enable KITL - Open Project > LOGIC_SOM_ARM_A8 properties window. - Select active configuration from drop-down menu. - Under Configuration Properties > Build Options: - check "Enable Kernel debugger" - check "Enable KITL" - Under Configuration Properties > Environment: - set environment variable "bsp_share_eth" to 1 --) How to disable KITL - Open Project > LOGIC_SOM_ARM_A8 properties window. - Select active configuration from drop-down menu. - Under Configuration Properties > Build Options: - uncheck "Enable Kernel debugger" - uncheck "Enable KITL" - Under Configuration Properties > Environment: - set environment variable "bsp_share_eth" to 0 --) How to shorten the delay between removing a storage device and seeing the icon disappear in Internet Explorer window - Adjust the following registry entries in platform.reg. The values shown here are recommended values only. [HKEY_LOCAL_MACHINE\System\StorageManager] "PNPUnloadDelay"=dword:3E8 ; 0.5s - default: dword:1000 (4096ms) "PNPWaitIODelay"=dword:1F4 ; 1.0s - default: dword:1000 (4096ms) --) How to set hive registry - The OS Designs included in this BSP use RAM registry. The hive registry component can be selected for custom development. Along with switching to the hive registry component (requires a Rebuild Solution, i.e., Clean Sysgen), select where the hive is placed using the variables below. - Hive-based registry can be set using BSP Variables. The default variable set is 'BSP_HIVE_YAFFS=1',which will set the proper registry entries for placing the hive on the YAFFS partition in NAND. For use on an SD card, set 'BSP_HIVE_SDHC=1' and the others to nothing. YAFFS HIVE (default if Hive used) In LOGIC_ARM_A8.bat set BSP_HIVE_YAFFS=1 set BSP_HIVE_SDHC= set BSP_HIVE_ATAMEMCF= SD CARD HIVE In LOGIC_ARM_A8.bat set BSP_HIVE_YAFFS= set BSP_HIVE_SDHC=1 set BSP_HIVE_ATAMEMCF= - Perform a Rebuild Solution (i.e., Clean Sysgen) when changing between RAM-based and Hive-based registries. --) How to build when changing bewteen platforms (Torpedo vs SOM-LV) - The BSP can support two platforms: DM3730/AM3703 Torpedo SOM or DM3730/AM3703 SOM-LV. The platform can be selected in Catalog Items View > Third Party > BSP > LOGIC_ARM_A8: ARM4VI > Platform Support (choose one) > DM37X SOM-LV or DM37X Torpedo. - Note that changing the platform requires a Clean Sysgen. This can be accomplished using one of the following options: - Solution Explorer > LOGIC_ARM_A8 > C:/WINCE600 > Platform > LOGIC_ARM_A8 (right-mouse-clik menu) > Rebuild - Menu > Build > Rebuild Solution - Menu > Build > Advance Build Commands > Clean Sysgen - Menu > Build > Advance Build Commands > Rebuild Current BSP and Subprojects 7) History --------------- --) Version 3.0.0 - 06/22/2011 --) Version 3.0.1 - 08/01/2011 - Updates to Wi-Fi chip detection (SOM-LV only) - Minor documentation updates --) Version 3.0.2 - 07/17/2013 - Added support for 256 MB and 512 MB RAM - Added SPI1 and SPI2 functionality - Fixed numerous display issues - Minor documentation updates 8) REVISION INFORMATION ----------------------- This is current SVN information for the SRS: $Rev:: 35188 $: Revision of last commit $Author:: steve.kim $: Author of last commit $Date:: 2013-07-18 15:23:32 -050#$: Date of last commit ----------------------------------------------------------------------------- Copyright (c) 2013 Logic PD, Inc. www.logicpd.com