Texas Instruments X-Loader 1.42 BSP-dm37x-2.4-3 for dm3730logic (2014-07-30 15:03:02) DRAM: 256MB (ProductID defined) Starting U-boot on MMC Reading boot sector 455608 bytes read from MMC to 80400000 U-Boot 2011.06 BSP-dm37x-2.4-3 (Nov 08 2014 - 21:09:00) OMAP3630/3730-GP ES2.1, CPU-OPP2, L3-200MHz, Max CPU Clock 1 Ghz Logic DM37x/OMAP35x reference board + LPDDR/NAND I2C: ready DRAM: 256 MiB Board: DM37xx Torpedo Enable battery backup charger (BB_CFG = 0x1c) NAND: 512 MiB NAND: Internal to NAND ECC selected Found '28' display panel In: serial Out: serial Err: serial Product ID data cached to: 40200000 Die ID #1be600029ff800000146a6061702a02c OTG_SYSCONFIG: 00001008 - needs to be 00002001 ID data ROM : Gen 2 Model : dm3730 Torpedo Version Code : -31 Temp Grade : Commercial Max Speed : 1000MHz Part Number : 1023835 Model Name : N/A Serial Number: 1413M00356 Data (writethrough) Cache is ON Net: smc911x-0 Hit any key to stop autoboot: 0 OMAP Logic # nand erase.chip NAND erase.chip: device 0 whole chip Erasing at 0x1ffe0000 -- 100% complete. OK OMAP Logic # run makeyaffsboot mmc1 is available reading rootfs.yaffs2 1 bytes read reading mlo 1 bytes read reading u-boot.bin.ift 1 bytes read reading uImage 1 bytes read == Loading mlo == reading mlo 46404 bytes read == Burning x-loader == NAND erase.part: device 0 offset 0x0, size 0x80000 Erasing at 0x60000 -- 100% complete. OK NAND write: device 0 offset 0x0, size 0xb544 NAND: HW ECC selected Writing 46404 bytes to 0 (wrote 46404 bytes) Writing 46404 bytes to 20000 (wrote 46404 bytes) Writing 46404 bytes to 40000 (wrote 46404 bytes) Writing 46404 bytes to 60000 (wrote 46404 bytes) 46404 bytes written: OK == Loading u-boot.bin.ift == reading u-boot.bin.ift 455620 bytes read == Burning u-boot == NAND erase.part: device 0 offset 0x80000, size 0x1a0000 Erasing at 0x200000 -- 100% complete. OK NAND write: device 0 offset 0x80000, size 0x6f3c4 NAND: Internal to NAND ECC selected 455620 bytes written: OK == Loading uImage == reading uImage 3055668 bytes read == Burning kernel == NAND erase.part: device 0 offset 0x280000, size 0x500000 Erasing at 0x760000 -- 100% complete. OK NAND write: device 0 offset 0x280000, size 0x2ea034 3055668 bytes written: OK == Loading rootfs.yaffs2 == reading rootfs.yaffs2 95660928 bytes read == Burning fs == NAND erase.part: device 0 offset 0x1b80000, size 0x1e480000 Erasing at 0x1ffe0000 -- 100% complete. OK NAND write: device 0 offset 0x1b80000, size 0x5b3ab80 95660928 bytes written: OK Saving Environment to NAND... Erasing Nand... Erasing at 0x260000 -- 100% complete. Writing to Nand... done Done! OMAP Logic # Texas Instruments X-Loader 1.42 BSP-dm37x-2.4-3 for dm3730logic (2014-07-30 15:03:02) DRAM: 256MB (ProductID defined) Booting from NAND NAND: in-chip ECC NAND in-chip ECC already set! SgnP image: 0x6f3b8 bytes read from NAND at offset 0x80000 to 80400000 U-Boot 2011.06 BSP-dm37x-2.4-3 (Nov 08 2014 - 21:09:00) OMAP3630/3730-GP ES2.1, CPU-OPP2, L3-200MHz, Max CPU Clock 1 Ghz Logic DM37x/OMAP35x reference board + LPDDR/NAND I2C: ready DRAM: 256 MiB Board: DM37xx Torpedo Enable battery backup charger (BB_CFG = 0x1c) NAND: 512 MiB NAND: Internal to NAND ECC selected Found '28' display panel In: serial Out: serial Err: serial Product ID data cached to: 40200000 Die ID #1be600029ff800000146a6061702a02c OTG_SYSCONFIG: 00001008 - needs to be 00002001 ID data ROM : Gen 2 Model : dm3730 Torpedo Version Code : -31 Temp Grade : Commercial Max Speed : 1000MHz Part Number : 1023835 Model Name : N/A Serial Number: 1413M00356 Data (writethrough) Cache is ON Net: smc911x-0 Hit any key to stop autoboot: 0 == Checking mmc1 for alternate boot script boot.scr == No MMC card found kernel_location: nand-part, rootfs_location: /dev, rootfs_type: yaffs == Loading kernel from nand partition kernel to 0x81000000 == Loading from nand0, offset 0x280000 Image Name: Linux-3.0.0-BSP-dm37x-2.4-3 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3055604 Bytes = 2.9 MiB Load Address: 80008000 Entry Point: 80008000 == rootfs located in /dev/mtdblock5 == == Kernel bootargs == nand-ecc=chip console=ttyO0,115200n8 display=28 ignore_loglevel early_printk no_console_suspend mtdparts=omap2-nand.0:512k(x-loader),1664k(u-boot),384k(u-boot-env),5m(kernel),20m(ramdisk),-(fs) root=/dev/mtdblock5 rw rootfstype=yaffs2 bootm 0x81000000 ## Booting kernel from Legacy Image at 81000000 ... Image Name: Linux-3.0.0-BSP-dm37x-2.4-3 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3055604 Bytes = 2.9 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.000000] Linux version 3.0.0-BSP-dm37x-2.4-3 (logic@logic-Virtualbox) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1-203) ) #21 Fri Oct 17 08:10:08 CDT 2014 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Logic DM37x Torpedo board [ 0.000000] omap3logic_product_id_set_location: ptr c0000240 size 606 [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Reserving 4194304 bytes SDRAM for VRAM [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk ) [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000 [ 0.000000] On node 0 totalpages: 64512 [ 0.000000] free_area_init_node: node 0, pgdat c0759e4c, node_mem_map c0cf6000 [ 0.000000] Normal zone: 512 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 64000 pages, LIFO batch:15 [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz [ 0.000000] Reprogramming SDRC clock to 400000000 Hz [ 0.000000] dpll3_m2_clk rate change failed: -22 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64000 [ 0.000000] Kernel command line: nand-ecc=chip console=ttyO0,115200n8 display=28 ignore_loglevel early_printk no_console_suspend mtdparts=omap2-nand.0:512k(x-loader),1664k(u-boot),384k(u-boot-env),5m(kernel),20m(ramdisk),-(fs) root=/dev/mtdblock5 rw rootfstype=yaffs2 [ 0.000000] omap3logic_display_selection:282 [ 0.000000] Standard display '28' 480:272:2:3:3:2:42:11:9000:1048576:16 [ 0.000000] omap3logic_display_selection: found panel '28' [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Memory: 252MB = 252MB total [ 0.000000] Memory: 242476k/242476k available, 19668k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB) [ 0.000000] vmalloc : 0xd0800000 - 0xf8000000 ( 632 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .init : 0xc0008000 - 0xc003d000 ( 212 kB) [ 0.000000] .text : 0xc003d000 - 0xc059af8c (5496 kB) [ 0.000000] .data : 0xc059c000 - 0xc0763050 (1821 kB) [ 0.000000] .bss : 0xc0763074 - 0xc0cf5c60 (5707 kB) [ 0.000000] NR_IRQS:410 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Total of 96 interrupts on 1 active controller [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 3951 kB [ 0.000000] per task-struct memory footprint: 2304 bytes [ 0.001098] Calibrating delay loop... 594.49 BogoMIPS (lpj=2322432) [ 0.085968] pid_max: default: 32768 minimum: 301 [ 0.086639] Security Framework initialized [ 0.087036] Mount-cache hash table entries: 512 [ 0.092620] CPU: Testing write buffer coherency: ok [ 0.108520] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_core [ 0.108551] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per [ 0.108551] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup [ 0.109069] omap_hwmod: gpt12_fck: missing clockdomain for gpt12_fck. [ 0.137878] print_constraints: dummy: [ 0.138427] cpufreq_core_init:1887 [ 0.140197] NET: Registered protocol family 16 [ 0.141357] GPMC revision 5.0 [ 0.147613] omap_device: omap_gpio.0: new worst case activate latency 0: 122070 [ 0.150421] OMAP GPIO hardware version 2.5 [ 0.152221] OMAP GPIO hardware version 2.5 [ 0.154022] OMAP GPIO hardware version 2.5 [ 0.155731] OMAP GPIO hardware version 2.5 [ 0.157531] OMAP GPIO hardware version 2.5 [ 0.159301] OMAP GPIO hardware version 2.5 [ 0.162322] omap_mux_init: Add partition: #1: core, flags: 0 [ 0.273773] omap3torpedo_fix_pbias_voltage:1341 PKUP_CTRL 0x40 [ 0.277465] omap3logic_lcd_init: name 28 data_lines 16 [ 0.282165] Setup pinmux and enable UART A [ 0.283142] omap_device: omap_uart.0: new worst case activate latency 0: 30517 [ 0.283782] omap_device: omap_uart.0: new worst case deactivate latency 0: 30517 [ 0.284179] Setup pinmux and enable UART B [ 0.286102] Setup pinmux and enable UART C [ 0.288024] omap3logic_product_id_move_data: product_id_data_location.ptr c0000240 [ 0.288177] U-boot Production Data (new format) is valid [ 0.288360] ID data ROM : Gen 2 [ 0.288391] Part Number : 1023835 [ 0.288391] Model Name : N/A [ 0.288421] Version Code : -31 [ 0.288421] Serial Number: 1413M00356 [ 0.288421] Max Mhz : 1000 [ 0.288452] WLAN ethaddr : 00:08:ee:06:ba:de [ 0.292999] _nand_init: id 0 nand_cs 0 [ 0.297882] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.309967] OMAP DMA hardware revision 5.0 [ 0.343353] bio: create slab at 0 [ 0.348571] SCSI subsystem initialized [ 0.349731] omap_device: omap2_mcspi.1: new worst case activate latency 0: 30517 [ 0.351043] omap_device: omap2_mcspi.1: new worst case deactivate latency 0: 30517 [ 0.353363] omap_device: omap2_mcspi.4: new worst case activate latency 0: 61035 [ 0.355621] usbcore: registered new interface driver usbfs [ 0.356292] usbcore: registered new interface driver hub [ 0.357086] usbcore: registered new device driver usb [ 0.360198] omap_device: omap_i2c.1: new worst case activate latency 0: 61035 [ 0.375305] omap_i2c omap_i2c.1: bus 1 rev4.0 at 2600 kHz [ 0.423736] twl4030: PIH (irq 7) chaining IRQs 368..375 [ 0.424041] twl4030: power (irq 373) chaining IRQs 376..383 [ 0.426483] twl4030: gpio (irq 368) chaining IRQs 384..401 [ 0.430786] omap_device: omap2_mcspi.1: new worst case activate latency 0: 122070 [ 0.434814] machine_constraints_voltage: VUSB1V5: override min_uV, 1 -> 1500000 [ 0.434875] machine_constraints_voltage: VUSB1V5: override max_uV, 2147483647 -> 1500000 [ 0.434906] print_constraints: VUSB1V5: 1500 mV normal standby [ 0.437255] machine_constraints_voltage: VUSB1V8: override min_uV, 1 -> 1800000 [ 0.437286] machine_constraints_voltage: VUSB1V8: override max_uV, 2147483647 -> 1800000 [ 0.437316] print_constraints: VUSB1V8: 1800 mV normal standby [ 0.439483] machine_constraints_voltage: VUSB3V1: override min_uV, 1 -> 3100000 [ 0.439514] machine_constraints_voltage: VUSB3V1: override max_uV, 2147483647 -> 3100000 [ 0.439575] print_constraints: VUSB3V1: 3100 mV normal standby [ 0.446990] twl4030_usb twl4030_usb: Initialized TWL4030 USB module [ 0.449310] print_constraints: vdd_mpu_iva: 600 <--> 1450 mV normal [ 0.452301] print_constraints: vdd_core: 600 <--> 1450 mV normal [ 0.455291] print_constraints: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby [ 0.457916] print_constraints: VDAC: 1800 mV normal standby [ 0.460601] print_constraints: VDVI: 1800 mV normal standby [ 0.463317] print_constraints: VMMC2: 1850 <--> 3150 mV at 2600 mV normal standby [ 0.465972] print_constraints: VAUX1: 3000 mV normal standby [ 0.468536] print_constraints: VAUX3: 2800 mV normal standby [ 0.469909] omap_device: omap_i2c.1: new worst case deactivate latency 0: 30517 [ 0.470458] omap_device: omap_i2c.1: new worst case activate latency 0: 91552 [ 0.484619] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz [ 0.500274] omap_i2c omap_i2c.3: bus 3 rev4.0 at 400 kHz [ 0.506408] Switching to clocksource 32k_counter [ 0.508209] Switched to NOHz mode on CPU #0 [ 0.640075] musb-hdrc: version 6.0, musb-dma, otg (peripheral+host) [ 0.640686] omap_device: musb-omap2430.-1: new worst case activate latency 0: 61035 [ 0.650726] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 0.650756] musb-hdrc: MHDRC RTL version 1.800 [ 0.650787] musb-hdrc: setup fifo_mode 4 [ 0.650787] musb-hdrc: 28/31 max ep, 16384/16384 memory [ 0.651855] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92 [ 0.653137] NET: Registered protocol family 2 [ 0.654479] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.657989] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.658508] TCP bind hash table entries: 8192 (order: 6, 360448 bytes) [ 0.663238] TCP: Hash tables configured (established 8192 bind 8192) [ 0.663452] TCP reno registered [ 0.663513] UDP hash table entries: 128 (order: 1, 12288 bytes) [ 0.663909] UDP-Lite hash table entries: 128 (order: 1, 12288 bytes) [ 0.665496] NET: Registered protocol family 1 [ 0.668060] RPC: Registered named UNIX socket transport module. [ 0.668090] RPC: Registered udp transport module. [ 0.668121] RPC: Registered tcp transport module. [ 0.668151] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.668334] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.852569] VFS: Disk quotas dquot_6.5.2 [ 0.852722] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.856842] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.857971] yaffs: yaffs built Oct 17 2014 08:09:45 Installing. [ 0.858337] msgmni has been set to 473 [ 0.864624] omap_device: musb-omap2430.-1: new worst case deactivate latency 0: 91552 [ 0.873107] io scheduler noop registered [ 0.873168] io scheduler deadline registered [ 0.873321] io scheduler cfq registered (default) [ 0.936584] OMAP DSS rev 2.0 [ 0.945800] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.953186] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0 [ 1.953430] console [ttyO0] enabled [ 1.958618] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1 [ 1.967315] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2 [ 2.009094] brd: module loaded [ 2.028442] loop: module loaded [ 2.036437] mtdoops: mtd device (mtddev=name/number) must be supplied [ 2.044189] omap2-nand driver initializing [ 2.049896] nand_get_flash_type: disturb cf700000 chipsize 536870912 erasesize 131072 [ 2.058258] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron NAND 512MiB 1,8V 16-bit) [ 2.067474] NAND ECC: HW_CHIP [ 2.070861] 6 cmdlinepart partitions found on MTD device omap2-nand.0 [ 2.077758] Creating 6 MTD partitions on "omap2-nand.0": [ 2.083404] 0x000000000000-0x000000080000 : "x-loader" [ 2.098419] 0x000000080000-0x000000220000 : "u-boot" [ 2.110443] 0x000000220000-0x000000280000 : "u-boot-env" [ 2.121582] 0x000000280000-0x000000780000 : "kernel" [ 2.136322] 0x000000780000-0x000001b80000 : "ramdisk" [ 2.165222] 0x000001b80000-0x000020000000 : "fs" [ 2.630249] smsc911x: Driver version 2008-10-21 [ 2.642913] smsc911x-mdio: probed [ 2.646972] smsc911x smsc911x.0: eth0: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=0:01, irq=-1) [ 2.658569] smsc911x smsc911x.0: eth0: MAC Address: 00:08:ee:06:3e:99 [ 2.666229] usbcore: registered new interface driver asix [ 2.672332] usbcore: registered new interface driver cdc_ether [ 2.678894] usbcore: registered new interface driver net1080 [ 2.685089] usbcore: registered new interface driver cdc_subset [ 2.691741] usbcore: registered new interface driver zaurus [ 2.697784] cdc_ncm: 01-June-2011 [ 2.701599] usbcore: registered new interface driver cdc_ncm [ 2.707702] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.715209] Initializing USB Mass Storage driver... [ 2.720947] usbcore: registered new interface driver usb-storage [ 2.727386] USB Mass Storage support registered. [ 2.732635] usbcore: registered new interface driver usbtest [ 2.750335] g_serial gadget: Gadget Serial v2.4 [ 2.755157] g_serial gadget: g_serial ready [ 2.759735] musb-hdrc musb-hdrc: MUSB HDRC host driver [ 2.768402] musb-hdrc musb-hdrc: new USB bus registered, assigned bus number 1 [ 2.777557] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.784820] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.792510] usb usb1: Product: MUSB HDRC host driver [ 2.797821] usb usb1: Manufacturer: Linux 3.0.0-BSP-dm37x-2.4-3 musb-hcd [ 2.804962] usb usb1: SerialNumber: musb-hdrc [ 2.814453] hub 1-0:1.0: USB hub found [ 2.818695] hub 1-0:1.0: 1 port detected [ 2.829864] mousedev: PS/2 mouse device common for all mice [ 2.841979] input: twl4030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input0 [ 2.866149] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 [ 2.873046] twl_rtc twl_rtc: Power up reset detected. [ 2.879730] twl_rtc twl_rtc: Enabling TWL-RTC. [ 2.885772] Linux media interface: v0.10 [ 2.891326] lirc_dev: IR Remote Control driver registered, major 250 [ 2.898468] IR NEC protocol handler initialized [ 2.903259] IR RC5(x) protocol handler initialized [ 2.908416] IR RC6 protocol handler initialized [ 2.913665] IR JVC protocol handler initialized [ 2.918426] IR Sony protocol handler initialized [ 2.924011] IR RC5 (streamzap) protocol handler initialized [ 2.929992] IR LIRC bridge handler initialized [ 2.934661] Linux video capture interface: v2.00 [ 2.940124] Driver for 1-wire Dallas network protocol. [ 2.946746] omap_hdq omap_hdq.0: OMAP HDQ Hardware Rev 0.5. Driver in Interrupt mode [ 2.959838] omap_device: omap_i2c.1: new worst case activate latency 0: 152587 [ 3.151916] omap_device: omap_wdt.-1: new worst case activate latency 0: 30517 [ 3.161102] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec [ 3.167633] omap_device: omap_wdt.-1: new worst case deactivate latency 0: 30517 [ 3.180023] cpuidle: using governor ladder [ 3.184356] cpuidle: using governor menu [ 3.389556] power_supply bq27000-battery: driver failed to report `voltage_now' property [ 3.399353] bq27000-battery bq27000-battery: support ver. 1.2.0 enabled [ 3.418823] Registered led device: led1 [ 3.423645] Registered led device: led2 [ 3.432037] Registered led device: led3 [ 3.437194] oprofile: hardware counters not available [ 3.442504] oprofile: using timer interrupt. [ 3.447326] nf_conntrack version 0.5.0 (3788 buckets, 15152 max) [ 3.457183] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.464080] TCP cubic registered [ 3.467498] Initializing XFRM netlink socket [ 3.472534] NET: Registered protocol family 17 [ 3.477569] NET: Registered protocol family 15 [ 3.483032] Registering the dns_resolver key type [ 3.490509] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 3.498840] ThumbEE CPU extension supported. [ 3.602508] clock: disabling unused clocks to save power [ 3.623229] Console: switching to colour frame buffer device 60x34 [ 3.634246] omap_device: omap_i2c.1: new worst case deactivate latency 0: 61035 [ 3.827239] power_supply bq27000-battery: driver failed to report `voltage_now' property [ 4.079376] regulator_init_complete: VAUX3: incomplete constraints, leaving on [ 4.087768] regulator_init_complete: VAUX1: incomplete constraints, leaving on [ 4.096649] regulator_init_complete: VDAC: incomplete constraints, leaving on [ 4.106506] omap_device: omap_i2c.1: new worst case activate latency 0: 183105 [ 4.119018] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 4.128417] omap_vout omap_vout: Buffer Size = 3686400 [ 4.138763] omap_vout omap_vout: : registered and initialized video device 0 [ 4.146514] omap_vout omap_vout: Buffer Size = 3686400 [ 4.154815] omap_vout omap_vout: : registered and initialized video device 1 [ 4.179870] yaffs: dev is 32505861 name is "mtdblock5" rw [ 4.185577] yaffs: passed flags "" [ 4.189361] yaffs: yaffs: Attempting MTD mount of 31.5,"mtdblock5" [ 4.196380] yaffs: oobavail(16) <= 28; forcing "tags-ecc-off" [ 13.238555] yaffs: yaffs_read_super: is_checkpointed 0 [ 13.244934] VFS: Mounted root (yaffs2 filesystem) on device 31:5. [ 13.251708] Freeing init memory: 212K Mounting /proc and /sys Starting the hotplug events dispatcher udevd Synthesizing initial hotplug events [ 14.086273] udevd (53): /proc/53/oom_adj is deprecated, please use /proc/53/oom_score_adj instead. Setting the hostname to DM-37x Run depmod to create modules.dep.bin Loading module g_ether [ 23.099670] g_ether: disagrees about version of symbol module_layout FATAL: Error inserting g_ether (/lib/modules/3.0.0-BSP-dm37x-2.4-3/kernel/drivers/usb/gadget/g_ether.ko): Invalid module format Mounting filesystems Starting syslogd and klogd SmartReflex autocompensation files not found in /sys/kernel/debug/smartreflex! Running sysctl to fix ARP flux when using multiple interfaces Starting the haveged entropy pool maintainer: Starting inetd: Starting the dropbear ssh server: Setting up touch handler and default /etc/pointercal Starting pwr-button: Using /dev/input/event0 for S2 power button input device DirectFB: Setup DirectFB for touch input Restoring ALSA state for soundcard omap3logic alsactl: load_state:1250: Cannot find soundcard 'omap3logic'... Enabling PM off mode: Welcome to the LTIB Embedded Linux Environment !!!!! WARNING !!!!!!! The default password for the root account is: root please change this password using the 'passwd' command and then edit this message (/etc/issue) to remove this message. To enable DHCP on ethernet, type "ifup eth0" DM-37x login: